This message was deleted.

Yes, Bind the interfaces to the LACP, bind the VLAN and SNIP to the interface, you want a SNIP bound on each VLAN you have. The mac moves you’re seeing is because the IP floats between interfaces, so i assume they bound the vlan to a interface, but not the SNIP. Each VLAN should only ever be associated with 1 interface (LACP counts as one) Make sure you’re mgmt is reachable and the default gateway isn’t in the mgmt network (Use PBR to control NSIP/SNIP traffic in the mgmt network) Disable interfaces that are not in used, remember native vlan on NS is present on all interfaces, if you need it tagged use -tagall

Thanks Mad's when should i do it before or after the Network guys make the port channel changes on the switch ?

You don’t really need to do anything beforehand, i just normally coordinate it, so we do it the same, so we can see it comes up fine. I always use the CLI to do it, it’s very simple. add channel LA/1 -ifnum 1/5 as an example, it will take default settings which are normally the correct. bind channel LA/1 1/6 if you wanted interface 1/5 and 1/6 within the same LACP (Or you can use the GUI to add interfaces after it’s created)

Thanks yeah aware of those articles and done it before setup LACP on a new Netscaler (fresh config) just never done it on a already configured Netscaler that has a exisiting configuration and is in use

What i’ve done before is make sure i have access to mgmt and then just work on one zone at the time, so start by creating the LACP with one of those interfaces, then add the other

I made the LACP change today all went good but when i run show ha node i see "Interfaces on which heartbeats are not seen : LA/4" LA/4 has the interfaces 1/1 1/2 1/3 1/4 bound and these are set as trunk ports on the switch as VLAN 99,98,100,110,200 are trunked through. I set the option Tag all Vlans to on on the LACP channel when i set it up and when binding the LA/4 channel to the vlans 99,98,100,110,200 i ticked the tagged option. Any idea how i can fix this issue with the HA heartbeats not seen on LA/4?