Customer wants to set "scale and display" to say 1...
# citrix-workspaceapp
c
Customer wants to set "scale and display" to say 125% or 150%; disconnect and reconnect and it goes back to default? 100%. Windows 10, 2402 LTSR VDA. tested on LTSR 2203 CU3 as well with same behavior. Tried Mac O/S and Windows endpoints, from CWA 2311, 2203 LTSR CU6 and CR 2305. Thought it would be related to CWA and DPI settings but changing to Yes, No use native and Let the O/S decide doesn't provide a solution either. Thoughts on where else to check?
r
@Corey Tracey Are they changing the DPI setting inside the session?
c
simply right clicking on desktop, going to display settings, and changing the % there. it does modify it while connected; a disconnect/reconnect resets it back
r
Ah. It is not supported to modify it inside the session. In order to get the correct DPI: 1. Set the CWA to No, use native resolution 2. Change DPI on endpoint 3. Connect to the session. The session will match the local monitors DPI setting
c
fantastic! that was it. Thanks @Rody Kossen
b
It's always a pleasure to see @Rody Kossen here! Has to be appreciated.
πŸ’― 1
j
@Rody Kossen was there a minimum CWA and VDA version match needed for the "No, use native resolution" to work correctly?
r
@Balint Oberrauch thanks, trying to doing my best ☺️ @Jeremy Saunders I don't know exactly when we introduced this, I think it was quite a while back. Which version are you running?
j
A mixture of 7.15 CU9 and 2203 CUx on the VDA, with 2203 CWA. From my notes this was addressed in CWA 2210 when the recommendation changed to "No, use native resolution", so we are still using "Yes". Due to CVE-2024-6286, we need to upgrade CWA, so will look to jump to CWA 2402 LTSR. But what about the VDA side? Will it work with 2203 VDA ?
r
VDA 2203 with that CWA should work yes. 7.15 is EOL, so I don't know
j
Awesome! Yeah, we are slowly moving to 2203, but with 19 sites and many PVS images, it takes time. "Citrix" upgrades are a full time job for a couple of our staff πŸ™‚