This message was deleted.
# citrix-netscalers
Slackbot
03/16/2023, 12:04 AMThis message was deleted.
j
Jan Tytgat
03/16/2023, 8:47 AMAre your VLAN (and management VLAN) assigned to the right interfaces?
Have the IP addresses also been bound to the VLAN?
Are you sure your routes are correct (compared to prod).
And maybe most important, are trying to access the new NS through the samen network as you try to access PROD?
r
Ryan Gallier
03/16/2023, 2:44 PMWhy would you have a default gateway that's not in the same network as the interface?
10.1.30.10
255.255.255.0
10.1.25.1
Ryan Gallier
03/16/2023, 2:44 PM10.1.25.1 is not in the same network as 10.1.30.x, thus will not work.
j
Jan Tytgat
03/16/2023, 3:07 PM@Ryan Gallier because the SDX puts the default gateway to the management network by default.
So once other networks have been configured, you change the default gateway to the actual network you want your traffic to go through.
Jan Tytgat
03/16/2023, 3:07 PMYou don’t want all your traffic to be going through the management network :-)
đź‘Ť 1
c
Clint Rocks
03/16/2023, 4:21 PM@Jan Tytgat The only thing that is different is the route.
Prod = 0.0.0.0 0.0.0.0 10.1.25.1
New = 0.0.0.0 0.0.0.0 10.1.30.1
When I delete the 10.1.30.1 route and add a 10.1.25.1 route it breaks and I can't connect back (only via SDX console) I can not figure out why.
I am using the same machine to access both.
j
Jan Tytgat
03/16/2023, 4:22 PMDo you have vlan filtering enabled on the SDX? It feels like a vlan is missing on the data interface
c
Clint Rocks
03/16/2023, 4:26 PMOne thing I forgot to mention is that the Prod and the New are using the same LCAP.
I looked for the VLAN filtering, I think it is enabled on all the interfaces.
j
Jan Tytgat
03/16/2023, 4:28 PMIn that case make sure the vlan of the network is listed on the data interface.
Given that prod works on the same LACP interface, the issue must lie in the VPX configuration.
c
Clint Rocks
03/16/2023, 4:30 PMDo you mean here?
j
Jan Tytgat
03/16/2023, 4:31 PMThat’s location one, I guess you should have the Tagged checkbox enabled.
The other location is in the vpx configuration on the SDX
Jan Tytgat
03/16/2023, 4:32 PMCompare that with the production instance. I guess your vlan 25 should be there at least
c
Clint Rocks
03/16/2023, 4:33 PMThis is the Prod
Clint Rocks
03/16/2023, 4:34 PMThe only difference I can see between the two is that Prod has the Gateway at 10.1.25.1 in the SDX settings and New can't without breaking.
j
Jan Tytgat
03/16/2023, 4:35 PMSo on prod vlan 25 is also untagged in the vpx?
c
Clint Rocks
03/16/2023, 4:36 PMYes sir.
j
Jan Tytgat
03/16/2023, 4:37 PMSwitch to the IP bindings view, do you have a SNIP or VIP bound to vlan 25 as well?
Jan Tytgat
03/16/2023, 4:39 PMThat’s the new instance?
c
Clint Rocks
03/16/2023, 4:39 PMProd
j
Jan Tytgat
03/16/2023, 4:40 PMCheck the new one
c
Clint Rocks
03/16/2023, 4:40 PMNo VIPs here yet.
j
Jan Tytgat
03/16/2023, 4:41 PMDo you have a snip in management as well?
Is it bound to the management vlan?
c
Clint Rocks
03/16/2023, 4:43 PMProd
Clint Rocks
03/16/2023, 4:44 PMNew
Clint Rocks
03/16/2023, 5:15 PMI don't think it matters. But prod is on 12.1 New is on 13.1