@Jarian Gibson Through an HVAC tech that came out. He said around $4000 installed for a mini-split. I priced it myself and a good Mitsubishi unit is $2000 so basically he wanted $2000 for the install and running lines. This portable unit was $490.91 shipped. I need to get an extended warranty for $150 because they are prone to failure around the 16 month mark. So total is $640.41. I chose it over something from Home Depot because it's made for this type of usage. It's a 12,000 BTU unit, no draining required, has an adapter to fit a duct and then point that onto hot spots in the server rack, restarts with the same settings you had before after a power failure, and the hose connectors fit really tight so no air leaks. You can exhaust out to the ceiling or out a window. Comes with everything you need. So far it's cooling the room down to 72 F per my in rack temp sensor and that's without the spot cooling duct on it. Granted my side panels are off right now, need to pop those back on later and check. The exhaust is pushing out at 100.5 F per a laser thermometer. Kill-a-watt is showing 1158 watts being used.
https://www.tripplite.com/smartrack-12000-btu-120v-portable-air-conditioning-unit-small-server-rooms-network-closets~SRCOOL12K/