Got it. Thanks! yeah ive already replaced the one I had with a rode xlr cable and its still occurring. Any other brands that come to mind with a super thick cable?

Any ways to update firmware on the Wireless Go II other than Rode Central? The android app says I need to update them on desktop before I can use them, but the desktop app won't recognize. I've been waiting all week for a response from support and I'm about to just go return these. Love all my other Rode products but this project needs to be started this weekend.

We'll be soon moving completely to #1128893908387115061! So any new questions you guys would like to raise make sure to use this new channel :D

I use my podmic usb as a direct input fors my macos, and i found that if i use it as direct input, the mute button on the back is not working. So anyone have good idea with how to mute the mic? Thanks

When I go to add one of the default sound effect, it doesn't show anything for me to choose

 Every time I add a sound effect  to a blank sound effect pad from my computer on the device. It deletes that sound effect that I’m at the end so I was wondering if anyone knew what was happening and how I could fix it so I can add more sound effects without recording it on the device. I don’t know if it’s the update that made me update to the latest version and it’s just messing it up but if you guys have suggestions, let me know. Please and thank you.

Is there a place to find additional voice effects for the rodecaster duo? Wondering if there’s something like a vocoder effect

What are the power requirements for a power supply? I’d like to buy a second one so I don’t have to undo my desk setup if I want to take it out of the office.

HEY! Can I use the Elgato Wave Link software to control my RØDE Nt-USB Mini? Or can I only control that with Røde Connect or Unify?

For some odd reason, whenever I mouse over an option in the RODE Central app, it will read out to me the selected option. "High pass filter. De-esser" etc, anything I select or mouse over and I hear that voice. I don't use any assistance software on my PC and it doesn't happen outside the Central app. Any idea how I can turn this off? I've hunted through all of the menus as best I can.

Hi, I'm new to the audio topic and would like to switch from a regular headset to an external microphone. I have chosen the RØDE NT1 5th gen. For my used a mixer would not be worth it therefore I have chosen the RØDE Ai-1. I would now be interested in whether, if I connect the microphone via XLR connector to the audio interface, whether I can then still use the RØDE Connect and / or RØDE Unify software, for example, to change the sound such as a compressor to turn on or whether all this is only possible when I connect the microphone via USB-C. I would also like to get new headphones. Since I then have an external microphone, I no longer need a headset and I would be interested in which headphones would be suitable. I am interested in the Beyerdynamic DT 990 PRO, mainly I would use it for voice chat and gaming, I know that the headphones are open and that is nothing for some, but I would still like to try it. Looking forward to your responses.

Hi. So, I've got a setup where I'd like to connect a TRS lavalier microphone to the AI Micro. The AI micro would then output to a bluetooth transmitter. So, I have two questions here, I guess: 1) Would the AI micro essentially act as a preamp for the microphone? I need something to give the mic some juice so that the bluetooth transmitter actually transmits audio, since the transmitter itself doesn't seem to provide plugin power. 2) Since in this setup, the AI Micro would not be hooked up to a phone or computer, would it still work if I just plugged the USB adapter into a compatible power outlet? Thanks

Hi I have a question. I have rode wireless go 2 and I'm looking for a solution how to use it with streamlabs for doing IRL streams and I can't find a solution how to make the microphones work with streamlabs any ideas or solutions. Thanks in advance

Hello all, I have a VideoMic NTG that is charged and recognized when I plug it into my Macbook. Attached below is the Rode Central app on the Macbook when the Videomic NTG is plugged in. However, when I use the Rode Central app on my iPhone 14 Pro Max using the Rode SC19 for my VideoMic NTG, nothing is recognized on the iPhone's Rode Central app. The mic also does not appear to work on the iPhone. However, the same iPhone, same SC19 cable, same Rode central app does recognize my Rode Wireless Go IIs, so I'm inclined to think the issue is my videomic NTG, except that my computer does recognize it.

Buenas a todos. Hace algún tiempo obtuve unos micrófonos rode wireless go ii y me estaba preguntando si puedo o cómo puedo amplificarlos sin que tengan retorno. Cada vez que los uso en un "auditorio", hay mucho retorno y suena esa típica interferencia

Hi, I've recently just purchased the Charge case for the wireless GO II and have noticed that it will always charge when the microphones are inserted, even when fully charged. Is there a way to stop it from constantly charging? I have noticed that it will drain the battery of the case and the unit feels warm.

i just gotten me a nt1 and i only have a xlr to usb on hand and i was wanting to know if it was possible for this to work

Every time I unplug my Videomic Go II from my MacBook Air M2 (it is connected via USB-C > Eizo Display > USB-A to USB-C Cable), the volume settings don't get correctly restored again. I always have to reset the Headphone Volume (I use the Output of the Mic because I also use the Unify App with the Headphone Monitoring settings), and about every second time the Mic preamp also starts to get disrupted audio (like way to much preamplification). Does anybody else also have problems like these?

Release date for the Rode WirelessPro seems to be end of the month in the US. Europe is often different and late. What is the release date in Europe and the price in Euro. Need the mic and can’t wait until end of the year to buy it at B&H. The new features are fantastic (32bit, screwed mics, time stamp) and exactly I am waiting for. Thanks Rode.

Looking at the videos I noticed the Smart charging case can be used as a hub to transfer files for the Wireless Pro series, wondering if the one for Wireless Go II will also be able to transfer files? or just purely for charging?

Hey there, I am wondering if there is like any way I can control something in UNIFY with my stream deck without a official plugin for it yet. I would want to like mute my microphone inside the stream input for like my streams? I might transition away from UNIFY if not.

Is there any way i can connect an xlr to my rode wirelless go and/or Pro

Hi, i just read up on the CineD Wireless Pro article and i got confused as they say it comes with a SC34 cable? And instead of Smart Charging Case they call it Charge Case(Pro). They also listed that there will be 3 Furry windshields is that correct? If anyone has a list of the accessories included do let me know! CineD article link: https://www.cined.com/rode-wireless-pro-announced-including-32-bit-float-on-board-recording-and-internal-timecode-generator/

Any details or ETA when this new desktop stand will be available?

does the rode wireless me offer playback so that one can hear nic input while recording? Thank you! Just wondering so it’s easier to record mic’ed up videos for sports.

Does anyone know what channel samples play on when using multitrack with the rodecaster duo?

I am a very large tech newbie, and have been running on a Blue Snowball ICE for the past 3 years. It's now starting to give out. My pricerange is $80 and I primarilly plan on just talking to my friends in a discord call.

hello. I just got the rodecaster duo and got it hooked up last night. When I have any audio on my computer, I hear it with a very quick echo almost like I am in a stadium. I have looked at having mix-minus on and it still doesn't seem to be helping. I also just had someone join me in discord and they can hear themselves. Anyone have any ideas?

For those of you who have sent in your NTH-100 headphones in for fitlock repair: Did you get an improved fitlock system, or is it just a repaired but same thin plastic that will break again in a few months?

I updated the RodeCaster II and now the main stereo audio input doesn’t push any sound from any source. I am working on a dual pc. And the only way to get sound is from my gaming pc. My stream pc is usb 1 and gaming pc is usb 2. I can only get audio to come through RodeCaster pro II chat. When the update happened I didn’t change anything until I realized I wasn’t getting audio from stream pc using the main stereo output See attached for how I have it set up