i changed the yaml file how to apply without reinstall it?

You don’t need to reinstall Airbyte to apply YAML configuration changes. From the provided docs, there are two main patterns, depending on what you changed: 1. If you’re using Octavia CLI (config-as-code) If the YAML you changed is an Octavia CLI resource file (source, destination, or connection), you apply it with:

octavia apply
# or only one file:
octavia apply -f path/to/your/configuration.yaml

Octavia will validate the YAML, show you a diff, and then update the resource on your running Airbyte instance. [Version control configs] 2. If you changed a Helm values.yaml (self‑managed / Kubernetes) If the YAML is your Helm

values.yaml

for the deployment, you re‑apply it with `helm upgrade`:

helm upgrade airbyte-enterprise airbyte/airbyte \
  --namespace airbyte \
  --values ./values.yaml \
  --version 2.x.x

(or similar

helm upgrade -i

command, depending on your setup). [Entra redeploy; Okta deploy] This updates the running deployment; it is not a full reinstall. If your YAML is something else (e.g., not Octavia configs or Helm values), the knowledge sources don’t describe how to apply it, so I can’t give a precise command. 👍 0 button 👎 0 button ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.

@kapa.ai I used abctl

With

abctl

, you don’t “apply” a YAML file directly; you pass it again to

abctl local install

. That command is used both for first install and for updating an existing local instance. If you changed your Helm

values.yaml

or secret file, run the same command you used originally, for example:

abctl local install --values ./values.yaml --secret ./secrets.yaml

This will update the existing Airbyte installation with your new YAML configuration; it does not wipe data by default. [Install/manage local] If you need to pin a specific chart version while updating:

abctl local install \
  --chart-version 0.422.2 \
  --values ./values.yaml \
  --secret ./secrets.yaml

[[Install/manage local](https://docs.airbyte.com/platform/deploying-airbyte/abctl#install-and-manage-local-airbyte-instances)]``` 👍 0 button 👎 0 button ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.

@kapa.ai failed to determine if any previous psql version exists: error reading pgdata version file: open /home/glpd/.airbyte/abctl/data/airbyte-volume-db/pgdata/PG_VERSION: permission denied

This error is a known

abctl local install

issue caused by filesystem permissions on the Postgres data directory.

abctl

tries to read

PG_VERSION

, but the

pgdata

directory is owned by UID/GID 70 with

0700

permissions, so your user can’t access it. [abctl pgdata issue] You have a few options: 1. Fix permissions (keep existing data) Run:

sudo chmod 755 ~/.airbyte/abctl/data/airbyte-volume-db/pgdata

Then re-run:

abctl local install

This lets

abctl

read

PG_VERSION

while keeping the existing database contents. [abctl pgdata issue] 2. Remove the DB volume (reset data) If you don’t need to preserve any previous Airbyte data:

rm -rf ~/.airbyte/abctl/data/airbyte-volume-db
abctl local install

This deletes the old Postgres data and lets

abctl

recreate it cleanly. [abctl pgdata issue] If you still hit permission problems on the broader

~/.airbyte/abctl

directory, some users resolved similar issues by relaxing permissions there (for example,

chmod -R

), but the knowledge sources don’t give a precise, recommended pattern beyond the commands above. [Uninstall permissions] 👍 0 button 👎 0 button ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.

@kapa.ai it is doing installaion: abctl local install --values ~/.airbyte/values.yaml INFO Using Kubernetes provider: Provider: kind Kubeconfig: /home/glpd/.airbyte/abctl/abctl.kubeconfig Context: kind-airbyte-abctl SUCCESS Found Docker installation: version 29.2.1 SUCCESS Existing cluster 'airbyte-abctl' found SUCCESS Cluster 'airbyte-abctl' validation complete INFO Patching image airbyte/db:1.7.0-17 INFO Pulling image airbyte/async-profiler:2.1.0 INFO Pulling image airbyte/bootloader:2.1.0 INFO Pulling image airbyte/connector-sidecar:2.1.0 INFO Pulling image airbyte/container-orchestrator:2.1.0 INFO Pulling image airbyte/cron:2.1.0 INFO Pulling image airbyte/db:1.7.0-17 INFO Pulling image airbyte/manifest-server:7.10.0 INFO Pulling image airbyte/server:2.1.0 INFO Pulling image airbyte/utils:2.1.0 INFO Pulling image airbyte/worker:2.1.0 INFO Pulling image airbyte/workload-api-server:2.1.0 INFO Pulling image airbyte/workload-init-container:2.1.0 INFO Pulling image airbyte/workload-launcher:2.1.0 INFO Pulling image temporalio/auto-setup:1.27.2 INFO Namespace 'airbyte-abctl' already exists INFO Persistent volume 'airbyte-local-pv' already exists INFO Persistent volume claim 'airbyte-storage-pvc' already exists INFO Persistent volume 'airbyte-volume-db' already exists INFO Persistent volume claim 'airbyte-volume-db-airbyte-db-0' already exists INFO Starting Helm Chart installation of 'airbyte/airbyte' (version: 2.1.0) ▄ Installing 'airbyte/airbyte' (version: 2.1.0) Helm Chart (this may take several minutes) (1m17s)

abctl local install --values ~/.airbyte/values.yaml

is the correct way to re‑apply config changes when you’re using `abctl`; it always runs an “install”, even when updating an existing cluster. This is expected behavior and is how you apply YAML changes without doing a manual uninstall. [Install/manage local] A few points based on your log: • It correctly detects the existing Kind cluster and volumes and then starts a Helm chart installation of

airbyte/airbyte

2.1.0 — that’s the update step. • The “Installing … (this may take several minutes)” phase can take quite a while depending on image pulls and cluster resources; docs mention up to ~30 minutes. [Install/manage local] • As long as it doesn’t error out, you can just let it run. If it seems stuck for a long time (e.g., >30–40 minutes) or eventually fails, the GitHub issues suggest: 1. Check pod status in the

airbyte-abctl

namespace:kubectl get pods -n airbyte-abctl --kubeconfig ~/.airbyte/abctl/abctl.kubeconfigLook for pods in

Pending

,

ImagePullBackOff

, or

CrashLoopBackOff

. [Bootloader hang; Image pull issues] 2. If the bootloader pod is the one hanging/failing, inspect its logs:kubectl logs airbyte-abctl-airbyte-bootloader -n airbyte-abctl --kubeconfig ~/.airbyte/abctl/abctl.kubeconfig(Pod name may differ slightly; use

kubectl get pods

output.) [Bootloader hang; Bootloader failed] 3. If it fails, you can safely retry:abctl local uninstall abctl local install --values ~/.airbyte/values.yamlSeveral users report that uninstall + reinstall resolves transient install issues. [abctl stuck; [abctl deploy issues] If you share the final outcome (success vs. specific error) or any failing pod state/logs, I can narrow down the next step using the relevant issues. 👍 0 button 👎 0 button ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.

@kapa.ai INFO Using Kubernetes provider: Provider: kind Kubeconfig: /home/glpd/.airbyte/abctl/abctl.kubeconfig Context: kind-airbyte-abctl SUCCESS Found Docker installation: version 29.2.1 SUCCESS Existing cluster 'airbyte-abctl' found SUCCESS Cluster 'airbyte-abctl' validation complete INFO Patching image airbyte/db:1.7.0-17 INFO Pulling image airbyte/async-profiler:2.1.0 INFO Pulling image airbyte/bootloader:2.1.0 INFO Pulling image airbyte/connector-sidecar:2.1.0 INFO Pulling image airbyte/container-orchestrator:2.1.0 INFO Pulling image airbyte/cron:2.1.0 INFO Pulling image airbyte/db:1.7.0-17 INFO Pulling image airbyte/manifest-server:7.10.0 INFO Pulling image airbyte/server:2.1.0 INFO Pulling image airbyte/utils:2.1.0 INFO Pulling image airbyte/worker:2.1.0 INFO Pulling image airbyte/workload-api-server:2.1.0 INFO Pulling image airbyte/workload-init-container:2.1.0 INFO Pulling image airbyte/workload-launcher:2.1.0 INFO Pulling image temporalio/auto-setup:1.27.2 INFO Namespace 'airbyte-abctl' already exists INFO Persistent volume 'airbyte-local-pv' already exists INFO Persistent volume claim 'airbyte-storage-pvc' already exists INFO Persistent volume 'airbyte-volume-db' already exists INFO Persistent volume claim 'airbyte-volume-db-airbyte-db-0' already exists INFO Starting Helm Chart installation of 'airbyte/airbyte' (version: 2.1.0) SUCCESS Installed Helm Chart airbyte/airbyte: Name: airbyte-abctl Namespace: airbyte-abctl Version: 2.1.0 AppVersion: 2.1.0 Release: 2 INFO Starting Helm Chart installation of 'nginx/ingress-nginx' (version: 4.15.1) SUCCESS Installed Helm Chart nginx/ingress-nginx: Name: ingress-nginx Namespace: ingress-nginx Version: 4.15.1 AppVersion: 1.15.1 Release: 1 SUCCESS Found existing Ingress SUCCESS Updated existing Ingress ▄ Attempting to launch web-browser for http://localhost:8000 (3m45s)/usr/bin/xdg-open: line 881: www-browser: command not found /usr/bin/xdg-open: line 881: links2: command not found /usr/bin/xdg-open: line 881: elinks: command not found /usr/bin/xdg-open: line 881: links: command not found /usr/bin/xdg-open: line 881: lynx: command not found /usr/bin/xdg-open: line 881: w3m: command not found xdg-open: no method available for opening 'http://localhost:8000' WARNING Failed to launch web-browser. Please launch your web-browser to access http://localhost:8000 SUCCESS Airbyte installation complete. A password may be required to login. The password can by found by running the command abctl local credentials INFO A new release of abctl is available: v0.30.3 -> v0.30.4 Updating to the latest version is highly recommended

Your installation completed successfully! 🎉 Here's a summary of what happened: • ✅ Helm chart

airbyte/airbyte

v2.1.0 installed • ✅ NGINX ingress updated with your new values • ⚠️ Browser launch failed — this is expected on a headless/server environment with no GUI browser installed; it's just a warning, not an error Access Airbyte Open your browser and go to: http//localhost8000 To get your login credentials, run:

abctl local credentials

This returns your email, password, client-id, and client-secret. [abctl credentials] Optional: Suppress the browser warning next time Since you're on a headless machine, add

--no-browser

to avoid the warning:

abctl local install --values ~/.airbyte/values.yaml --no-browser

[abctl reference] Recommended: Update abctl The log also suggests updating

abctl

from v0.30.3 to v0.30.4:

brew upgrade abctl

or via curl if you installed that way:

curl -LsfS https://get.airbyte.com | bash -

[Install abctl] 👍 0 button 👎 0 button ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.

@kapa.ai can I delete that from tmp? images-tar-151202202

The knowledge sources do not contain specific information about the

images-tar-*

temporary directory (e.g.,

/tmp/images-tar-151202202

) that

abctl

creates during image loading. However, based on what the knowledge sources do show, this directory is a temporary image archive that

abctl

creates during installation to load Docker images into the Kind cluster. For example:

DEBUG   saving image archive to /tmp/images-tar-3346902064/images.tar

Once the installation has completed successfully (which yours did ✅), this temp directory is no longer needed. You should be safe to delete it:

rm -rf /tmp/images-tar-151202202

That said, I'd recommend confirming no active

abctl

process is running before deleting it, just to be safe. 👍 0 button 👎 0 button ℹ️ Tip: Mention @kapa.ai in the thread for follow-ups or DM the app for 1-to-1 help.