Getting an error like this WARNING Encountered ...
# ask-ai
s
Getting an error like this WARNING Encountered an issue deploying Airbyte: Pod: airbyte-db-{an id} Reason: BackOff Message: Back-off restarting failed container airbyte-db-container in pod airbyte-db-0_airbyte-abctl(an id) Count: 923 Logs: chown: /var/lib/postgresql/data/pgdata: Operation not permitted chmod: /var/lib/postgresql/data/pgdata: Operation not permitted PostgreSQL Database directory appears to contain a database; Skipping initialization date UTC [16] FATAL: data directory "/var/lib/postgresql/data/pgdata" has wrong ownership date UTC [16] HINT: The server must be started by the user that owns the data directory.
k
This error is caused by filesystem permissions on the Postgres data directory that Airbyte’s
airbyte-db
pod mounts. From similar reports with
abctl
local installs, Postgres fails to `chown`/`chmod`
/var/lib/postgresql/data/pgdata
, then starts up with an existing data directory that is owned by the wrong user or has invalid permissions, and repeatedly crashes. [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093); [Colima pg perms](https://github.com/airbytehq/airbyte/issues/54995)] In those issues, users fixed it by correcting ownership/permissions on the host-side directory that backs the
airbyte-db
volume: - For a typical
abctl local install
, the Postgres data is under
~/.airbyte/abctl/data/airbyte-volume-db
(and inside it,
pgdata
). One user resolved it with: [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)]
Copy code
bash   chown 70:70 ~/.airbyte/abctl/data/airbyte-volume-db
where
70
is the UID/GID used by the Postgres container. - Another user (on a Google VM) had to additionally grant access to the current user on the
pgdata
directory / version file: [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)]
Copy code
bash   sudo setfacl -m u:$USER:x ~/.airbyte/abctl/data/airbyte-volume-db/pgdata   sudo setfacl -m u:$USER:r ~/.airbyte/abctl/data/airbyte-volume-db/pgdata/PG_VERSION
In other cases, the Postgres logs explicitly complain about wrong ownership or invalid permissions (must be
0700
or
0750
), leading to the same BackOff loop. [[abctl db connect](https://github.com/airbytehq/airbyte/issues/54199)] So, based on the shared symptoms: 1. Stop your local Airbyte deployment (
abctl local uninstall
or stop the cluster). 2. Fix the host directory that backs the Postgres volume: - Identify that directory (for
abctl
it is usually
~/.airbyte/abctl/data/airbyte-volume-db
). - Change owner to the UID used by the Postgres pod (commonly
70:70
in the reports):
Copy code
bash      sudo chown -R 70:70 ~/.airbyte/abctl/data/airbyte-volume-db
- If you still see “Operation not permitted”, adjust ACLs as in the example above. 3. Re‑run
abctl local install
and check that
airbyte-db
starts without the ownership error. If your setup uses a different path or UID, the knowledge sources don’t provide more detail; in that case you’d need to inspect the pod’s
mounts
and
id
inside the Postgres container to align ownership manually.
s
@kapa.ai Now getting this error Unable to install Airbyte locally ERROR unable to install airbyte chart: unable to install helm: failed to create patch: The order in patch list: [map[name:CHECK_JOB_MAIN_CONTAINER_MEMORY_REQUEST valueFrommap[configMapKeyRefmap[key:CHECK_JOB_MAIN_CONTAINER_MEMORY_REQUEST name:airbyte-abctl-airbyte-env]]] map[name:CHECK_JOB_MAIN_CONTAINER_MEMORY_REQUEST value:0] map[name:DISCOVER_JOB_MAIN_CONTAINER_MEMORY_REQUEST value:0] map[name:DISCOVER_JOB_MAIN_CONTAINER_MEMORY_REQUEST valueFrommap[configMapKeyRefmap[key:DISCOVER_JOB_MAIN_CONTAINER_MEMORY_REQUEST name:airbyte-abctl-airbyte-env]]] map[name:SIDECAR_MAIN_CONTAINER_CPU_REQUEST value:0] map[name:SIDECAR_MAIN_CONTAINER_CPU_REQUEST valueFrommap[configMapKeyRefmap[key:SIDECAR_MAIN_CONTAINER_CPU_REQUEST name:airbyte-abctl-airbyte-env]]] map[name:SIDECAR_MAIN_CONTAINER_MEMORY_REQUEST value:0] map[name:SIDECAR_MAIN_CONTAINER_MEMORY_REQUEST valueFrommap[configMapKeyRefmap[key:SIDECAR_MAIN_CONTAINER_MEMORY_REQUEST name:airbyte-abctl-airbyte-env]]] map[name:AIRBYTE_INSTALLATION_ID value:63432744-1df7-47b5-b44b-59c200d0c826]] doesn't match $setElementOrder list: [map[name:CLUSTER_TYPE] map[name:CONTROL_PLANE_AUTH_ENDPOINT] map[name:AIRBYTE_EDITION] map[name:AIRBYTE_VERSION] map[name:AIRBYTE_CLUSTER_TYPE] map[name:AIRBYTE_CLUSTER_NAME] map[name:AIRBYTE_URL] map[name:AIRBYTE_API_HOST] map[name:AIRBYTE_SERVER_HOST] map[name:API_AUTHORIZATION_ENABLED] map[name:CONNECTOR_BUILDER_SERVER_API_HOST] map[name:MANIFEST_SERVER_API_HOST] map[name:DEPLOYMENT_ENV] map[name:INTERNAL_API_HOST] map[name:LOCAL] map[name:AIRBYTE_DUMMY_SECRET] map[name:DATABASE_HOST] map[name:DATABASE_PORT] map[name:DATABASE_URL] map[name:DATABASE_USER] map[name:DATABASE_PASSWORD] map[name:DATABASE_DB] map[name:RUN_DATABASE_MIGRATION_ON_STARTUP] map[name:CONFIGS_DATABASE_MINIMUM_FLYWAY_MIGRATION_VERSION] map[name:JOBS_DATABASE_MINIMUM_FLYWAY_MIGRATION_VERSION] map[name:JOB_KUBE_SERVICEACCOUNT] map[name:JOB_KUBE_NAMESPACE] map[name:JOB_KUBE_LOCAL_VOLUME_ENABLED] map[name:JOB_KUBE_MAIN_CONTAINER_IMAGE_PULL_SECRET] map[name:JOB_KUBE_ANNOTATIONS] map[name:JOB_KUBE_LABELS] map[name:JOB_KUBE_NODE_SELECTORS] map[name:JOB_KUBE_TOLERATIONS] map[name:JOB_ERROR_REPORTING_STRATEGY] map[name:CHECK_JOB_KUBE_NODE_SELECTORS] map[name:CHECK_JOB_KUBE_RUNTIME_CLASS_NAME] map[name:DISCOVER_JOB_KUBE_NODE_SELECTORS] map[name:DISCOVER_JOB_KUBE_RUNTIME_CLASS_NAME] map[name:JOB_ISOLATED_KUBE_NODE_SELECTORS] map[name:JOB_ISOLATED_KUBE_RUNTIME_CLASS_NAME] map[name:JOB_SOURCE_DECLARATIVE_MANIFEST_KUBE_NODE_SELECTORS] map[name:JOB_SOURCE_DECLARATIVE_MANIFEST_KUBE_RUNTIME_CLASS_NAME] map[name:LOG_LEVEL] map[name:MICROMETER_METRICS_ENABLED] map[name:MICROMETER_METRICS_STEP] map[name:MICROMETER_METRICS_STATSD_FLAVOR] map[name:MICROMETER_METRICS_OTLP_ENABLED] map[name:MICROMETER_METRICS_STATSD_ENABLED] map[name:OTEL_COLLECTOR_ENDPOINT] map[name:PUBLISH_METRICS] map[name:STATSD_HOST] map[name:STATSD_PORT] map[name:MICRONAUT_ENVIRONMENTS] map[name:STORAGE_TYPE] map[name:STORAGE_BUCKET_ACTIVITY_PAYLOAD] map[name:STORAGE_BUCKET_AUDIT_LOGGING] map[name:STORAGE_BUCKET_LOG] map[name:STORAGE_BUCKET_STATE] map[name:STORAGE_BUCKET_WORKLOAD_OUTPUT] map[name:SECRET_PERSISTENCE] map[name:AUTO_SETUP] map[name:TEMPORAL_HOST] map[name:DYNAMIC_CONFIG_FILE_PATH] map[name:PROMETHEUS_ENDPOINT] map[name:BIND_ON_IP] map[name:TEMPORAL_BROADCAST_ADDRESS] map[name:TEMPORAL_WORKER_PORTS] map[name:TRACKING_ENABLED] map[name:TRACKING_STRATEGY] map[name:SEGMENT_WRITE_KEY] map[name:ACTIVITY_MAX_ATTEMPT] map[name:ACTIVITY_INITIAL_DELAY_BETWEEN_ATTEMPTS_SECONDS] map[name:ACTIVITY_MAX_DELAY_BETWEEN_ATTEMPTS_SECONDS] map[name:CONFIG_ROOT] map[name:DISCOVER_REFRESH_WINDOW_MINUTES] map[name:MAX_CHECK_WORKERS] map[name:MAX_NOTIFY_WORKERS] map[name:MAX_SYNC_WORKERS] map[name:SYNC_JOB_MAX_ATTEMPTS] map[name:SYNC_JOB_MAX_TIMEOUT_DAYS] map[name:SYNC_JOB_INIT_RETRY_TIMEOUT_MINUTES] map[name:USE_CUSTOM_NODE_SELECTOR] map[name:USE_STREAM_CAPABLE_STATE] map[name:WORKFLOW_FAILURE_RESTART_DELAY_SECONDS] map[name:WORKSPACE_DOCKER_MOUNT] map[name:WORKSPACE_ROOT] map[name:WORKER_ENVIRONMENT] map[name:WORKLOAD_API_SERVER_ENABLED] map[name:WORKLOAD_API_HOST] map[name:CONTAINER_ORCHESTRATOR_SECRET_NAME] map[name:CONTAINER_ORCHESTRATOR_SECRET_MOUNT_PATH] map[name:CONTAINER_ORCHESTRATOR_DATA_PLANE_CREDS_SECRET_MOUNT_PATH] map[name:CONTAINER_ORCHESTRATOR_DATA_PLANE_CREDS_SECRET_NAME] map[name:CONTAINER_ORCHESTRATOR_DATA_PLANE_CREDS_SECRET_KEY] map[name:CONTAINER_ORCHESTRATOR_JAVA_OPTS] map[name:KUBERNETES_CLIENT_MAX_IDLE_CONNECTIONS] map[name:KUBERNETES_CLIENT_MAX_RETRIES] map[name:PUB_SUB_ENABLED] map[name:PUB_SUB_TOPIC_NAME] map[name:DATA_CHECK_TASK_QUEUES] map[name:DATA_DISCOVER_TASK_QUEUES] map[name:DATA_SYNC_TASK_QUEUES] map[name:CONNECTOR_SPECIFIC_RESOURCE_DEFAULTS_ENABLED] map[name:JOB_MAIN_CONTAINER_CPU_LIMIT] map[name:JOB_MAIN_CONTAINER_CPU_REQUEST] map[name:JOB_MAIN_CONTAINER_MEMORY_LIMIT] map[name:JOB_MAIN_CONTAINER_MEMORY_REQUEST] map[name:CHECK_JOB_MAIN_CONTAINER_CPU_LIMIT] map[name:CHECK_JOB_MAIN_CONTAINER_CPU_REQUEST] map[name:CHECK_JOB_MAIN_CONTAINER_MEMORY_LIMIT] map[name:CHECK_JOB_MAIN_CONTAINER_MEMORY_REQUEST] map[name:DISCOVER_JOB_MAIN_CONTAINER_CPU_LIMIT] map[name:DISCOVER_JOB_MAIN_CONTAINER_CPU_REQUEST] map[name:DISCOVER_JOB_MAIN_CONTAINER_MEMORY_LIMIT] map[name:DISCOVER_JOB_MAIN_CONTAINER_MEMORY_REQUEST] map[name:FILE_TRANSFER_EPHEMERAL_STORAGE_LIMIT] map[name:FILE_TRANSFER_EPHEMERAL_STORAGE_REQUEST] map[name:REPLICATION_ORCHESTRATOR_CPU_LIMIT] map[name:REPLICATION_ORCHESTRATOR_CPU_REQUEST] map[name:REPLICATION_ORCHESTRATOR_MEMORY_LIMIT] map[name:REPLICATION_ORCHESTRATOR_MEMORY_REQUEST] map[name:SIDECAR_MAIN_CONTAINER_CPU_LIMIT] map[name:SIDECAR_MAIN_CONTAINER_CPU_REQUEST] map[name:SIDECAR_MAIN_CONTAINER_MEMORY_LIMIT] map[name:SIDECAR_MAIN_CONTAINER_MEMORY_REQUEST] map[name:CONTROL_PLANE_TOKEN_ENDPOINT] map[name:WORKLOAD_LAUNCHER_ENABLED] map[name:WORKLOAD_LAUNCHER_PARALLELISM] map[name:DATAPLANE_CLIENT_ID] map[name:DATAPLANE_CLIENT_ID_SECRET_NAME] map[name:DATAPLANE_CLIENT_ID_SECRET_KEY] map[name:DATAPLANE_CLIENT_SECRET] map[name:DATAPLANE_CLIENT_SECRET_SECRET_NAME] map[name:DATAPLANE_CLIENT_SECRET_SECRET_KEY] map[name:JOB_KUBE_CONNECTOR_IMAGE_REGISTRY] map[name:CONNECTOR_PROFILER_IMAGE] map[name:CONNECTOR_SIDECAR_IMAGE] map[name:CONTAINER_ORCHESTRATOR_ENABLED] map[name:CONTAINER_ORCHESTRATOR_IMAGE] map[name:WORKLOAD_INIT_IMAGE] map[name:AIRBYTE_INSTALLATION_ID] map[name:CHECK_JOB_MAIN_CONTAINER_CPU_REQUEST] map[name:CHECK_JOB_MAIN_CONTAINER_MEMORY_REQUEST] map[name:DISCOVER_JOB_MAIN_CONTAINER_CPU_REQUEST] map[name:DISCOVER_JOB_MAIN_CONTAINER_MEMORY_REQUEST] map[name:SIDECAR_MAIN_CONTAINER_CPU_REQUEST] map[name:SIDECAR_MAIN_CONTAINER_MEMORY_REQUEST] map[name:SPEC_JOB_MAIN_CONTAINER_CPU_REQUEST] map[name:SPEC_JOB_MAIN_CONTAINER_MEMORY_REQUEST]] I think I changed the permissions of other folders which may have broken things
k
A message from kapa.ai
This new error is the known “failed to create patch: The order in patch list” Helm issue with
abctl
, caused by how environment variables are being patched into the Deployment. [[Common errors](https://docs.airbyte.com/platform/deploying-airbyte/troubleshoot-deploy#failed-to-create-patch-order-in-patch-list)] From the docs: - Error pattern:
unable to install airbyte chart: unable to install helm: failed to create patch: The order in patch list
- It happens with
abctl local install
, especially when it’s been run more than once with different options (e.g.
--low-resource-mode
). [[Common errors](https://docs.airbyte.com/platform/deploying-airbyte/troubleshoot-deploy#failed-to-create-patch-order-in-patch-list)] The specific env vars in your message (
CHECK_JOB_MAIN_CONTAINER_MEMORY_REQUEST
,
DISCOVER_JOB_MAIN_CONTAINER_MEMORY_REQUEST
,
SIDECAR_*
, etc.) are just another manifestation of the same underlying bug: the generated patch list doesn’t match the
$setElementOrder
that Helm expects, so Helm refuses to apply the upgrade. At the moment, the official status for this class of error is “Fixing” in
abctl
(GitHub PR #114). [[Common errors](https://docs.airbyte.com/platform/deploying-airbyte/troubleshoot-deploy#failed-to-create-patch-order-in-patch-list)] The knowledge sources don’t yet provide a reliable, supported workaround beyond acknowledging the bug. Given that: 1. This is not directly caused by the filesystem permission change you made; it’s a Helm patch–ordering bug in
abctl
. 2. The documentation does not describe a concrete fix (only that the issue is being addressed upstream). Practical options, based only on the available information: - Retry with a clean local environment: - Remove the local
abctl
state and volumes (for example, deleting
~/.airbyte/abctl
and recreating the local cluster) may avoid conflicting prior configuration, but this is not guaranteed as a fix—the docs don’t confirm it. - Avoid mixing install modes (regular vs
--low-resource-mode
) until the fix in PR #114 is released and you can upgrade
abctl
to a version that contains it. [[Common errors](https://docs.airbyte.com/platform/deploying-airbyte/troubleshoot-deploy#failed-to-create-patch-order-in-patch-list)] Because the knowledge sources do not describe a definitive remediation procedure beyond “Status: Fixing,” I can’t provide a certain step‑by‑step fix. If you need a stable deployment immediately, you may want to use an alternative deployment method (e.g., the standard Helm chart without
abctl
) until the updated
abctl
is available.
s
recreating the local cluster) may avoid conflicting prior configuration, but this is not guaranteed as a fix—the docs don’t confirm it. @kapa.ai won't this cause the postgres data to be deleted (with my connections data)
k
A message from kapa.ai
You’re right to be cautious—whether data is lost depends on how you “recreate the local cluster.” From the docs for `abctl`: - Safe (does NOT delete data):
Copy code
bash   abctl local uninstall
> “To stop running all containers, but keep your data:” [[Quickstart](https://docs.airbyte.com/platform/using-airbyte/getting-started/oss-quickstart#uninstall-airbyte); [abctl doc](https://docs.airbyte.com/platform/deploying-airbyte/abctl#install-and-manage-local-airbyte-instances)] Then you can run:
Copy code
bash   abctl local install
This should preserve your existing Postgres data (connections, etc.), because only the containers are stopped; volumes are kept. - Destructive (DOES delete data):
Copy code
bash   abctl local uninstall --persisted   rm -rf ~/.airbyte/abctl
> “To stop running containers and delete all data…” [[Quickstart](https://docs.airbyte.com/platform/using-airbyte/getting-started/oss-quickstart#uninstall-airbyte); [abctl doc](https://docs.airbyte.com/platform/deploying-airbyte/abctl#install-and-manage-local-airbyte-instances)] So: - If you only run
abctl local uninstall
followed by
abctl local install
, your Postgres data should not be deleted. - If you use
--persisted
and/or delete
~/.airbyte/abctl
, that will wipe your data and you’ll be starting fresh. The knowledge sources don’t describe any additional side effects beyond this, so if you want to “recreate” the cluster without losing data, stay away from
--persisted
and
rm -rf ~/.airbyte/abctl
.
s
How to set username and password @kapa.ai
k
A message from kapa.ai
To set or change the username (email) and password for a local Airbyte instance installed with
abctl
, use the
abctl local credentials
command. ### 1. See current credentials
Copy code
bash abctl local credentials
This returns something like:
Copy code
bash {   "email": "[YOUR EMAIL]",   "password": "[RANDOM PASSWORD]",   "client-id": "[RANDOM CLIENT-ID]",   "client-secret": "[RANDOM CLIENT-SECRET]" }
[[Install & manage](https://docs.airbyte.com/platform/deploying-airbyte/abctl#install-and-manage-local-airbyte-instances)] ### 2. Set a new password (and/or email) You can update both email and password:
Copy code
bash abctl local credentials --email YOUR_EMAIL --password YourStrongPasswordExample
or just the password:
Copy code
bash abctl local credentials --password YourStrongPasswordExample
After running this, the Airbyte server restarts, and you then log in with the new credentials. [[Quickstart auth](https://docs.airbyte.com/platform/using-airbyte/getting-started/oss-quickstart#part-4-set-up-authentication); [Install & manage](https://docs.airbyte.com/platform/deploying-airbyte/abctl#install-and-manage-local-airbyte-instances)] ### For Kubernetes (Helm) deployments If you’re not using
abctl
and deployed Airbyte with Helm, you set the password via a Kubernetes secret: 1. Create `secret.yaml`:
Copy code
yaml apiVersion: v1 kind: Secret metadata:   name: airbyte-auth-secrets type: Opaque stringData:   instance-admin-password: your-password-here    # Optional if you want known API credentials:   #instance-admin-client-id: my-client-id   #instance-admin-client-secret: my-client-secret
2. Apply it:
Copy code
bash kubectl apply -f secret.yaml -n <YOUR_NAMESPACE>
You may need to restart the
airbyte-server
pod for it to take effect. [[Auth docs](https://docs.airbyte.com/platform/deploying-airbyte/integrations/authentication)]
s
@kapa.ai I uninstalled and resintalled and now all my connections, sources, etc are gone
k
A message from kapa.ai
When using
abctl
, data persistence depends on the uninstall steps you ran: -
abctl local uninstall
only stops containers and keeps data (Postgres volumes etc.). Your connections, sources, and destinations should still be there when you reinstall. [[Quickstart](https://docs.airbyte.com/platform/using-airbyte/getting-started/oss-quickstart#uninstall-airbyte); [abctl manage](https://docs.airbyte.com/platform/deploying-airbyte/abctl#install-and-manage-local-airbyte-instances)] -
abctl local uninstall --persisted
deletes all data for the installation, including the datastore volumes (Postgres), so your connections, sources, destinations, and history are wiped. This is the documented way to reset back to a clean, fresh install. [[Quickstart](https://docs.airbyte.com/platform/using-airbyte/getting-started/oss-quickstart#uninstall-airbyte); [Reset dev env](https://docs.airbyte.com/platform/1.8/contributing-to-airbyte/developing-locally#resetting-the-airbyte-developer-environment)] - Deleting the
abctl
data directory (e.g.
rm -rf ~/.airbyte/abctl
or
rm -rf ~/.airbyte/
) also removes the local cluster state and data on disk. [[Quickstart](https://docs.airbyte.com/platform/using-airbyte/getting-started/oss-quickstart#uninstall-airbyte); [Reset dev env](https://docs.airbyte.com/platform/1.8/contributing-to-airbyte/developing-locally#resetting-the-airbyte-developer-environment)] Given that your connections and sources are gone after reinstalling, the most likely case is that at least one of these destructive steps was run:
Copy code
bash abctl local uninstall --persisted # and/or rm -rf ~/.airbyte/abctl # or rm -rf ~/.airbyte/
In that situation, the knowledge sources indicate the data is permanently deleted; they do not document any supported recovery mechanism from those commands. If you only ran
abctl local uninstall
(without
--persisted
and without removing
~/.airbyte
), the data should still exist, and its disappearance would not match the documented behavior.
s
Maybe it was because I ran uninstall as sudo I was messin g around with permission to fix the issue @kapa.ai All my data should have been stored in pgdata
k
A message from kapa.ai
Running
abctl
(including
abctl local uninstall
) with
sudo
can definitely affect what happens to your data, but the exact behavior isn’t documented in detail. What is documented: -
abctl local uninstall
(without flags) is supposed to stop containers but keep data so you can reinstall later with everything preserved. [[Quickstart uninstall](https://docs.airbyte.com/platform/using-airbyte/getting-started/oss-quickstart#uninstall-airbyte); [abctl manage](https://docs.airbyte.com/platform/deploying-airbyte/abctl#install-and-manage-local-airbyte-instances)] -
abctl local uninstall --persisted
is explicitly destructive and “will remove all data for the Airbyte installation. This cannot be undone.” [[abctl reference](https://docs.airbyte.com/platform/deploying-airbyte/abctl#reference)] - Removing the
~/.airbyte
or
~/.airbyte/abctl
directory also deletes the
abctl
data on disk, which is how the docs explain resetting the developer environment. [[Reset dev env 1.8](https://docs.airbyte.com/platform/1.8/contributing-to-airbyte/developing-locally#resetting-the-airbyte-developer-environment)] The docs confirm that the Postgres data for a local
abctl
install lives under
~/.airbyte/abctl/data/airbyte-volume-db
(which contains
pgdata
). [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)] That aligns with your understanding that “all my data should have been stored in pgdata”. However: - There is no explicit documentation on what happens if you run
abctl local uninstall
as
sudo
instead of your normal user. - Running
abctl
as
root
can change ownership and permissions of the directories under
~/.airbyte/abctl
in ways that later prevent Postgres from starting correctly (as seen in the permission-related GitHub issue, where users fix it by `chown`/ACL changes). [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)] - If, while “messing around with permissions,” you also ran
abctl local uninstall --persisted
or removed
~/.airbyte
/
~/.airbyte/abctl
, then the docs are clear: the data is deleted and not recoverable from Airbyte’s perspective. [[Quickstart uninstall](https://docs.airbyte.com/platform/using-airbyte/getting-started/oss-quickstart#uninstall-airbyte); [Reset dev env 1.8](https://docs.airbyte.com/platform/1.8/contributing-to-airbyte/developing-locally#resetting-the-airbyte-developer-environment)] So, based on the available information: - Your data would have been in
~/.airbyte/abctl/data/airbyte-volume-db/pgdata
. - If that directory (or the entire
~/.airbyte/abctl
tree) was removed or wiped by
--persisted
or
rm -rf
, the knowledge sources indicate the data is gone. - If it still exists on disk but is owned/permissioned in a way that Postgres can’t use it, the docs and issues don’t describe a supported way for Airbyte to “repair” or re-import that corrupted volume; they only show how to fix permissions to get the DB running again. [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)] The documentation does not provide a recovery procedure for partially broken or root-owned
pgdata
created via
sudo
, so I can’t reliably guide you to get those lost connections back just from these sources. The only documented way to get a clean working state after such issues is to intentionally wipe the environment (which also wipes data) and reinstall. [[Reset dev env 1.8](https://docs.airbyte.com/platform/1.8/contributing-to-airbyte/developing-locally#resetting-the-airbyte-developer-environment)]
s
How can I go into the db and check if connectors exist @kapa.ai
k
A message from kapa.ai
To see whether your connectors (sources/destinations) still exist, you need to connect to Airbyte’s internal Postgres database and inspect its tables. The docs don’t list the exact schema for connectors, but they do show how to open a Postgres shell to a Postgres destination or to Airbyte’s demo Postgres instances, which is effectively the same pattern you’ll use. [[Full refresh tut](https://airbyte.com/tutorials/full-data-synchronization#step-8); [CDC ELT step 2](https://airbyte.com/tutorials/postgresql-change-data-capture-elt#step-2)] Because you installed with
abctl
, Airbyte’s internal DB runs in the
airbyte-db
pod inside the local kind cluster. From the
abctl
troubleshooting docs, you can use
kubectl
against that cluster like this: [[abctl troubleshoot](https://docs.airbyte.com/platform/deploying-airbyte/troubleshoot-deploy#faq)] 1. Point
kubectl
at the
abctl
cluster and open a shell in the DB pod:
Copy code
bash    export KUBECONFIG="$HOME/.airbyte/abctl/abctl.kubeconfig"     kubectl exec -it -n airbyte-abctl airbyte-db-0 -- /bin/bash
(This is the same pattern used in the GitHub issue where a user fixed
dataplane
records. [[GH issue 58587](https://github.com/airbytehq/airbyte/issues/58587)]) 2. Once inside the container, connect to the Airbyte DB with `psql`:
Copy code
bash    psql -U airbyte db-airbyte
This is the exact command used in that issue. [[GH issue 58587](https://github.com/airbytehq/airbyte/issues/58587)] 3. From here, you can explore what’s in the database:
Copy code
sql    \dt;
This lists all tables so you can see what’s there. [[Full refresh tut](https://airbyte.com/tutorials/full-data-synchronization#step-8); [CDC incremental](https://airbyte.com/tutorials/incremental-data-synchronization#step-7)] The knowledge sources do not document which specific tables correspond to sources/destinations/connectors in the internal schema, nor specific SQL queries to list them. So while you can connect and list tables as above, I can’t reliably tell you “run query X on table Y to list connectors” from the provided material.
s
ERROR failed to determine if any previous psql version exists: error reading pgdata version file: open /home/ec2-user/.airbyte/abctl/data/airbyte-volume-db/pgdata/PG_VERSION: permission denied
@kapa.ai ERROR failed to determine if any previous psql version exists: error reading pgdata version file: open /home/ec2-user/.airbyte/abctl/data/airbyte-volume-db/pgdata/PG_VERSION: permission denied
k
A message from kapa.ai
That error means your local
pgdata
directory (on the host) is not readable by your user, so `psql`/tools can’t even read
PG_VERSION
. This matches the permission problems seen in several
abctl
issues, where
pgdata
ends up with ownership/ACLs that block access. [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)] From the GitHub reports: - Users fixed similar “Permission denied” on
pgdata
by changing ownership to the Postgres UID used in the pod (commonly
70
): [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)]
Copy code
bash   sudo chown -R 70:70 ~/.airbyte/abctl/data/airbyte-volume-db
- Others needed to add ACL entries so their user could at least traverse/read the directory: [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)]
Copy code
bash   sudo setfacl -m u:$USER:x ~/.airbyte/abctl/data/airbyte-volume-db/pgdata   sudo setfacl -m u:$USER:r ~/.airbyte/abctl/data/airbyte-volume-db/pgdata/PG_VERSION
Once you fix the host‑side permissions like that, you have two options to inspect whether data still exists: 1. Preferred: connect inside the running pod If
airbyte-db
is running:
Copy code
bash    export KUBECONFIG="$HOME/.airbyte/abctl/abctl.kubeconfig"     kubectl exec -it -n airbyte-abctl airbyte-db-0 -- /bin/bash    psql -U airbyte db-airbyte
This pattern (using
kubectl exec
into the DB pod and running
psql -U airbyte db-airbyte
) is what’s shown in a related issue. [[GH issue 58587](https://github.com/airbytehq/airbyte/issues/58587)] 2. If the pod won’t start but
pgdata
is intact
The knowledge sources don’t describe a supported way to attach an external
psql
directly to the
pgdata
folder on disk, nor how to run a standalone Postgres against that directory. They only show correcting ownership/ACLs so the pod’s Postgres can start. [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)] If, after fixing permissions,
airbyte-db
still can’t start (e.g., continues to crash with ownership/permission errors), the provided sources do not document a reliable recovery path to introspect or salvage that `pgdata`; they assume you either: - fix permissions and the pod comes up, or - wipe the environment and lose the data. [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)] So the next concrete step, based on the docs/issues, is to: 1. Run
chown
(and, if needed,
setfacl
) on
~/.airbyte/abctl/data/airbyte-volume-db/pgdata
. 2. Restart/reinstall with
abctl local install
(without
--persisted
). 3. If
airbyte-db
starts,
kubectl exec
+
psql -U airbyte db-airbyte
will let you check what’s in the DB.
s
@kapa.ai Getting this now ERROR unable to set permissions for '/home/ec2-user/.airbyte/abctl/data/airbyte-minio-pv': chmod /home/ec2-user/.airbyte/abctl/data/airbyte-minio-pv: operation not permitted when running abctl install
k
A message from kapa.ai
That error is another host‑filesystem permission issue very similar to the `airbyte-volume-db`/`pgdata` problems you hit earlier, but now for the MinIO volume directory
~/.airbyte/abctl/data/airbyte-minio-pv
.
abctl
is trying to
chmod
that directory and the OS is denying it. From the related issues: - For the DB volume, users fixed “operation not permitted” by adjusting ownership/ACLs on the directories under
~/.airbyte/abctl/data
, so that both the host user and the container UID can access them. [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093); [Bootloader perms bug](https://github.com/airbytehq/airbyte/issues/50429)] - One user fixed a similar
abctl
permission problem by recursively relaxing permissions on the whole
~/.airbyte/abctl
tree: [[Uninstall cfg issue](https://github.com/airbytehq/airbyte/issues/64508)]
Copy code
bash   sudo chmod -R 777 ~/.airbyte/abctl
Given what’s documented, the options we know people have used successfully are: 1. Relax permissions on the whole
abctl
dir (quick but broad):
Copy code
bash    sudo chmod -R 777 ~/.airbyte/abctl
This is exactly what the GitHub commenter used to resolve their
abctl
permission issue. [[Uninstall cfg issue](https://github.com/airbytehq/airbyte/issues/64508)] 2. Or: target the specific problematic path:
Copy code
bash    sudo chmod -R 777 ~/.airbyte/abctl/data/airbyte-minio-pv
This mirrors the pattern in the DB‑volume workarounds (fixing permissions on
airbyte-volume-db
). [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093); [Bootloader perms bug](https://github.com/airbytehq/airbyte/issues/50429)] After applying one of those, re‑run:
Copy code
bash abctl local install
The knowledge sources do not provide a more fine‑grained, officially recommended permission scheme for
airbyte-minio-pv
beyond these user‑reported
chmod 777
style fixes, so I can’t suggest a safer minimal set from the docs alone.
s
@kapa.ai Now getting ERROR unable to set permissions for '/home/ec2-user/.airbyte/abctl/data/airbyte-volume-db': chmod /home/ec2-user/.airbyte/abctl/data/airbyte-volume-db: operation not permitted
k
A message from kapa.ai
This
operation not permitted
on
airbyte-volume-db
is the same class of permission issue others have hit with `abctl`’s local Postgres volume. From the GitHub issues, users fixed it by changing ownership/permissions on the
~/.airbyte/abctl
tree so
abctl
can
chmod
the directory successfully: - One user had a generic
abctl
permission problem and resolved it with: [[Uninstall cfg issue](https://github.com/airbytehq/airbyte/issues/64508)]
Copy code
bash   sudo chmod -R 777 ~/.airbyte/abctl
- For the Postgres volume specifically (
airbyte-volume-db
), others also changed ownership/ACLs on that path so the Postgres UID (70) and the current user could access it: [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)]
Copy code
bash   sudo chown -R 70:70 ~/.airbyte/abctl/data/airbyte-volume-db   # and, on some systems, additional ACLs:   sudo setfacl -m u:$USER:x ~/.airbyte/abctl/data/airbyte-volume-db/pgdata   sudo setfacl -m u:$USER:r ~/.airbyte/abctl/data/airbyte-volume-db/pgdata/PG_VERSION
Given your
chmod ... operation not permitted
error, the simplest documented fix is:
Copy code
bash sudo chmod -R 777 ~/.airbyte/abctl
then retry:
Copy code
bash abctl local install
If it still fails on
airbyte-volume-db
, apply the
chown 70:70
on that directory as in the second snippet above and run
abctl local install
again. [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093); [Uninstall cfg issue](https://github.com/airbytehq/airbyte/issues/64508)] The knowledge sources don’t document a more precise, least‑privilege permission scheme; they only show these broad
chmod 777
/
chown 70:70
workarounds.
s
@kapa.ai Now see this warning as it's coming up over and over again Count: 23 Logs: ERROR Unable to use the drive /storage: drive access denied: Invalid arguments specified
k
A message from kapa.ai
That warning matches a known
abctl
local install issue where MinIO cannot access its mounted volume: >
Logs: ERROR Unable to use the drive /storage: drive access denied: Invalid arguments specified
[[Colima Postgres perms](https://github.com/airbytehq/airbyte/issues/54995)] In that issue, the MinIO pod (
airbyte-minio-0
) is in
BackOff
and logs that exact error because it cannot use the
/storage
path, which is the PVC mount mapped to
~/.airbyte/abctl/data/airbyte-minio-pv
on the host. [[Colima Postgres perms](https://github.com/airbytehq/airbyte/issues/54995)] Given everything you’ve done (changing ownership, chmod, running
abctl
with/without sudo), the most likely causes are: - The host directory backing MinIO (
~/.airbyte/abctl/data/airbyte-minio-pv
) still has permissions or mount options that prevent MinIO from using it. - Prior failed installs/uninstalls left that path in a bad state. From the available reports, users resolve similar storage issues by: 1. Fixing permissions on the MinIO PV directory For other
abctl
permission issues, a user successfully fixed things by recursively relaxing permissions on the whole
~/.airbyte/abctl
tree: [[Uninstall cfg issue](https://github.com/airbytehq/airbyte/issues/64508)]
Copy code
bash    sudo chmod -R 777 ~/.airbyte/abctl
You’ve already done something like this, but the MinIO error suggests the underlying restriction (possibly from the Docker/VM runtime) still exists. 2. Recreating the MinIO storage In a related context (sync jobs hanging), users fixed MinIO problems by deleting and recreating the MinIO storage (the persistent volume), at the cost of losing logs stored there. [[Syncs hanging](https://github.com/airbytehq/airbyte/issues/55812)] For
abctl
, that would mean: - Stopping the local cluster:
Copy code
bash      abctl local uninstall
- Deleting just the MinIO PV directory on the host:
Copy code
bash      rm -rf ~/.airbyte/abctl/data/airbyte-minio-pv
- Then reinstalling:
Copy code
bash      abctl local install
The knowledge sources don’t explicitly document this sequence for MinIO with
abctl
, but they do show that deleting MinIO storage resolved the same “Unable to use the drive /storage: drive access denied” class of errors. [[Colima Postgres perms](https://github.com/airbytehq/airbyte/issues/54995); [Syncs hanging](https://github.com/airbytehq/airbyte/issues/55812)] Because there is no step‑by‑step official fix for this exact MinIO
/storage
error in the docs, I can’t guarantee the above will resolve it in every environment; they’re the only documented patterns from similar GitHub issues. If, after deleting
airbyte-minio-pv
and reinstalling, the same error persists, the knowledge sources do not provide further MinIO‑specific troubleshooting guidance beyond recognizing it as a drive access/permissions problem.
s
@kapa.ai ERROR unable to set permissions for '/home/ec2-user/.airbyte/abctl/data/airbyte-minio-pv': chmod /home/ec2-user/.airbyte/abctl/data/airbyte-minio-pv: operation not permitted Getting this error now
k
A message from kapa.ai
That
chmod … operation not permitted
on
airbyte‑minio-pv
is the same kind of host‑filesystem permission problem you’ve been hitting, but now specifically on MinIO’s volume directory. From the issues and docs we have: -
abctl
expects to be able to manage permissions under
~/.airbyte/abctl
, including
data/airbyte-minio-pv
and
data/airbyte-volume-db
. When it can’t, you see exactly this error. [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093); [M4 chmod error](https://github.com/airbytehq/airbyte/issues/50429)] - One user with a similar
abctl
permission problem fixed it by recursively relaxing permissions on the entire
~/.airbyte/abctl
directory
: [[Cfg perm fix](https://github.com/airbytehq/airbyte/issues/64508)]
Copy code
bash   sudo chmod -R 777 ~/.airbyte/abctl
- For the DB volume, other users additionally had to adjust ownership/ACLs for the data directory before
abctl
could proceed. [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)] Given that, the only concrete, documented workarounds are: 1. Ensure everything under
~/.airbyte/abctl
is writable:
Copy code
bash    sudo chmod -R 777 ~/.airbyte/abctl
Then retry:
Copy code
bash    abctl local install
2. If it still fails on
airbyte-minio-pv
, you can delete just that directory (this will wipe any MinIO data, e.g. logs/archives, but not your DB if you don’t touch
airbyte-volume-db
), then reinstall:
Copy code
bash    abctl local uninstall      # without --persisted, to keep DB data    rm -rf ~/.airbyte/abctl/data/airbyte-minio-pv    abctl local install
Deleting MinIO storage to recover from
/storage
drive errors is mentioned in a related issue, though not specifically for
abctl
. [[Minio drive error](https://github.com/airbytehq/airbyte/issues/54995)] The knowledge sources do not document a more precise/least‑privilege permission scheme for
airbyte-minio-pv
or a different supported fix beyond these
chmod -R 777
and “delete PV and reinstall” patterns, so if these steps still result in “operation not permitted,” I don’t have additional, documented remediation to suggest.
s
@kapa.ai ERROR unable to set permissions for '/home/ec2-user/.airbyte/abctl/data/airbyte-local-pv': chmod /home/ec2-user/.airbyte/abctl/data/airbyte-local-pv: operation not permitted Seems to be happening to every folder
k
A message from kapa.ai
This pattern—`operation not permitted` on every
~/.airbyte/abctl/data/*
directory when
abctl
tries to
chmod
them—is the same class of permission issue reported in several
abctl
GitHub issues, but applied across all local volumes (DB, MinIO, local PV). [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093); [M4 chmod error](https://github.com/airbytehq/airbyte/issues/50429)] From the sources: - Users see identical errors when
abctl
“updates permissions” on
airbyte-volume-db
and fails with
chmod … operation not permitted
, even after trying
chmod 777
manually. [[M4 chmod error](https://github.com/airbytehq/airbyte/issues/50429)] - One user resolved a broad
abctl
permission problem by recursively relaxing permissions on the entire
~/.airbyte/abctl
dir: [[Cfg perm fix](https://github.com/airbytehq/airbyte/issues/64508)]
Copy code
bash   sudo chmod -R 777 ~/.airbyte/abctl
This is the only clearly documented “whole-tree” fix. - Others had to fix ownership/ACL on the DB volume specifically (
airbyte-volume-db
) to get past Postgres startup errors, e.g.
chown 70:70 ~/.airbyte/abctl/data/airbyte-volume-db
and
setfacl
commands. [[Perm issue abctl](https://github.com/airbytehq/airbyte/issues/62093)] However, in your case: - You’re already seeing
operation not permitted
even when
abctl
itself tries to chmod
, and it now affects
airbyte-local-pv
,
airbyte-minio-pv
, and
airbyte-volume-db
. - The knowledge sources do not describe a scenario where every chmod under
~/.airbyte/abctl/data
remains forbidden even after
sudo chmod -R 777 ~/.airbyte/abctl
, nor do they offer a deeper root-cause analysis (e.g., host mount flags, special FS, or security tooling). Given only what’s documented, the concrete, supported things you can still try are: 1. Ensure the entire
~/.airbyte/abctl
tree is writable (again):
Copy code
bash    sudo chmod -R 777 ~/.airbyte/abctl
This is the only explicit “fix” we have in the sources for an
abctl
permission issue on that tree. [[Cfg perm fix](https://github.com/airbytehq/airbyte/issues/64508)] 2. If that doesn’t help, completely reset the local
abctl
environment (this will delete all data):
Copy code
bash    abctl local uninstall --persisted    rm -rf ~/.airbyte/abctl
This is the documented way to fully wipe a broken local environment. [[Quickstart uninstall](https://docs.airbyte.com/platform/using-airbyte/getting-started/oss-quickstart#uninstall-airbyte); [Reset dev env](https://docs.airbyte.com/platform/1.8/contributing-to-airbyte/developing-locally#resetting-the-airbyte-developer-environment)] After that, reinstall:
Copy code
bash    abctl local install
If, even on a fresh
~/.airbyte/abctl
(after
rm -rf
) you still get
operation not permitted
on all these directories, the knowledge sources do not provide further guidance; they don’t document another layer of troubleshooting for this situation. In that case, the docs/issues suggest that the environment itself (filesystem, Docker/VM config, or host-level restrictions) is blocking
chmod
, but there is no Airbyte-specific, documented fix I can point you to beyond the wipe-and-reinstall step above.