<@U04S8PLJWMT> how can I change on airbyte 2.0.1 d...
# ask-ai
f
@kapa.ai how can I change on airbyte 2.0.1 deployed by abctl the resources given to a replica job? currently I have values.yaml like the following but it is instantiating default values
Copy code
postgresql:
  enabled: false
  extraVolumes:
  - name: postgres-ssl-cert
    configMap:
      name: postgres-ssl-cert
  extraVolumeMounts:
    - name: postgres-ssl-cert
      mountPath: /etc/ssl/certs/postgres-ca.crt
      subPath: ca.crt
  extraEnv:
    - name: POSTGRES_TLS_ENABLED
      value: "true"
    - name: POSTGRES_TLS_DISABLE_HOST_VERIFICATION
      value: "true"
    - name: SQL_TLS_ENABLED
      value: "true"
    - name: SQL_TLS_DISABLE_HOST_VERIFICATION
      value: "true"

global:
  auth:
    enabled: false
  resources:
    worker:
      jobs:
        requests:
          memory: "6Gi"
        limits:
          memory: "8Gi"
k
Airbyte 2.x (Helm chart V2) no longer uses
global.resources.worker.jobs
for connector job resources, so your current
values.yaml
block is effectively ignored. In V2, instance‑wide job resources are controlled via the
JOB_MAIN_CONTAINER_*
settings, which map to
global.workloads.resources.mainContainer.*
in
values.yaml
.[[Vars mapping](https://docs.airbyte.com/platform/deploying-airbyte/chart-v2-community#update-your-valuesyaml-file); [Configuring resources](https://docs.airbyte.com/platform/operator-guides/configuring-connector-resources)] From the env‑var → V2 mapping table: -
JOB_MAIN_CONTAINER_CPU_REQUEST
→
global.workloads.resources.mainContainer.cpu.request
-
JOB_MAIN_CONTAINER_CPU_LIMIT
→
global.workloads.resources.mainContainer.cpu.limit
-
JOB_MAIN_CONTAINER_MEMORY_REQUEST
→
global.workloads.resources.mainContainer.memory.request
-
JOB_MAIN_CONTAINER_MEMORY_LIMIT
→ `global.workloads.resources.mainContainer.memory.limit`[[Vars mapping](https://docs.airbyte.com/platform/deploying-airbyte/chart-v2-community#update-your-valuesyaml-file); [Configuring resources](https://docs.airbyte.com/platform/operator-guides/configuring-connector-resources)] To change resources for replication (and other) job pods globally, update your
values.yaml
like this (example matching your 6/8Gi intent):
Copy code
yaml global:   auth:     enabled: false   workloads:     resources:       mainContainer:         cpu:           request: "500m"      # adjust as needed           limit: "1000m"         memory:           request: "6Gi"           limit: "8Gi"
Then re‑apply via
abctl
(which applies the underlying Helm chart). A few caveats from the docs: - Any connector‑definition, connector‑specific, or connection‑specific resource settings stored in the Airbyte database override these instance‑wide defaults.[[Configuring resources](https://docs.airbyte.com/platform/operator-guides/configuring-connector-resources)] - There is also ongoing work/issues around legacy
global.jobs.resources
vs `global.workloads.resources`; the latter is the path used in V2.[[Helm jobs.resources issue](https://github.com/airbytehq/airbyte/issues/65515)] If, after this change, a specific replica job still uses unexpected limits, it may have per‑connector/per‑connection resource requirements stored in the database, which take precedence.
f
@kapa.ai I want that each replication pod has 2 CPUs and 6GB of ram
k
A message from kapa.ai
To target ~2 CPUs and 6 GiB RAM per replication job pod in Airbyte 2.x deployed via
abctl
(Helm chart V2), you set the instance‑wide job container resources via the
JOB_MAIN_CONTAINER_*
→
global.workloads.resources.mainContainer.*
mapping.[[Chart v2 mapping](https://docs.airbyte.com/platform/deploying-airbyte/chart-v2-community#update-your-valuesyaml-file); [Connector resources](https://docs.airbyte.com/platform/operator-guides/configuring-connector-resources)] In your `values.yaml`:
Copy code
yaml global:   workloads:     resources:       mainContainer:         cpu:           request: "2"      # 2 CPUs requested           limit: "2"        # 2 CPUs limit (adjust if you want a higher cap)         memory:           request: "6Gi"    # 6 GiB requested           limit: "6Gi"      # 6 GiB limit (or higher if you want headroom)
Then re‑deploy with
abctl
so these values are applied. Important: - These are instance‑wide defaults for all job containers.[[Connector resources](https://docs.airbyte.com/platform/operator-guides/configuring-connector-resources)] - Any connector‑definition / connector‑specific / connection‑specific resource configs stored in the DB override these defaults, which is why some jobs may still use “hardcoded” values until you adjust or remove those DB‑level settings.[[Connector resources](https://docs.airbyte.com/platform/operator-guides/configuring-connector-resources)]
f
@kapa.ai I have the following replica
Copy code
{
  "shared_state": {
    "state": {
      "is_compressed": true,
      "mysql_cdc_offset": {
        "[\"volagratis\",{\"server\":\"volagratis\"}]": "{\"ts_sec\":1764049718,\"file\":\"db05-slave.087119\",\"pos\":4,\"row\":1,\"server_id\":11502,\"event\":6}"
      },
      "mysql_db_history": "\"RSoLoUba+rKk8p5ZTKPB90F+6+fpFmCVNdFr0gSUp1oMtFkoslEk4kmT50R0eSp0yGaTDSZaDLRZKLJRJOJJhNNJpr8SqPJWw8pRaofe0jRydw+ktFDcjcaB1+Aqjv8IPwg/CD8IPwg/CD8IPwg/CD8IPwg/CD8IPwg/CD8IPygOj8oiaof+kFKOONz6wFHP8hf6QfVs+qyQaAIVhBWEFYQVhBWcOFcea9aKVb9ULW0EdHkYMFRtWaZsHIKq18+bBcBQoAQIAQIAVqBAKVAzWMBcjbmSM1RgK6dlnIRre4bohjQnauTtzVkEaA7X3gTdNJn1148N8G5Rnac4uqRhkZDo6G9oIb2P6JTKK5ukbUB\""
    }
if I have to change the binlog and position inside the mysql cdc offset do I have to change also mysql_db_history on connection state? if not why?
k
A message from kapa.ai
You do not need (or want) to manually change
mysql_db_history
when you adjust the binlog file/position in
mysql_cdc_offset
. What these fields represent, based on the CDC docs and forum content: -
mysql_cdc_offset
holds the Debezium/MySQL binlog position that Airbyte will resume from (file + position etc.). This is effectively the CDC “cursor” for MySQL.[[CDC overview](https://docs.airbyte.com/platform/understanding-airbyte/cdc)] -
mysql_db_history
is Debezium’s internal, compressed history of schema changes. It is more complex and error‑prone to edit manually; even for simpler non‑CDC state, Airbyte engineers describe direct DB edits as “hacky and prone to error, especially with CDC whose state is a bit more complex than for the other connectors”.[[MySQL CDC to Kafka](https://discuss.airbyte.io/t/1584)] Existing guidance around manual cursor/state edits focuses on updating the cursor (or state JSON) only, not rebuilding Debezium’s history blob.[[Manually defined cursor](https://discuss.airbyte.io/t/828); [Managing connection state](https://docs.airbyte.com/platform/cloud/managing-airbyte-cloud/manage-connection-state)] So: - If you must force CDC to start from a different binlog position, you should only adjust the
mysql_cdc_offset
entry. - Leave
mysql_db_history
as‑is; changing it without Debezium’s own logic is very likely to corrupt state and break CDC. Because the provided docs don’t describe a supported, detailed procedure for editing CDC state internals, any such change should be treated as risky; if possible, prefer using the UI “Connection state” editor to adjust where the sync restarts, and only touch low‑level fields under guidance from Airbyte support.[[Managing connection state](https://docs.airbyte.com/platform/cloud/managing-airbyte-cloud/manage-connection-state)]
f
@kapa.ai I'm watching on logs
Copy code
2025-11-28 12:15:11 platform INFO [initContainer] image: airbyte/workload-init-container:2.0.1 resources: ResourceRequirements(claims=[], limits={memory=1024Mi, cpu=1}, requests={memory=1024Mi, cpu=1}, additionalProperties={})
2025-11-28 12:15:11 platform INFO Launching replication pod: replication-job-642-attempt-0 (selectors = {}) with containers:
2025-11-28 12:15:11 platform INFO [source] image: airbyte/source-mysql:3.51.5 resources: ResourceRequirements(claims=[], limits={memory=2Gi, cpu=2}, requests={memory=1Gi, cpu=1}, additionalProperties={})
2025-11-28 12:15:11 platform INFO [destination] image: airbyte/destination-bigquery:3.0.16 resources: ResourceRequirements(claims=[], limits={memory=2Gi, cpu=2}, requests={memory=1Gi, cpu=1}, additionalProperties={})
2025-11-28 12:15:11 platform INFO [orchestrator] image: airbyte/container-orchestrator:2.0.1 resources: ResourceRequirements(claims=[], limits={memory=1024Mi, cpu=1}, requests={memory=1024Mi, cpu=1}, additionalProperties={})
but I want 6GB, not 1
k
A message from kapa.ai
Those log lines show that per‑container resources are not using your instance‑wide settings; they’re coming from higher‑precedence configs (connector definition / connector‑specific / connection‑specific) stored in the Airbyte DB. Airbyte applies resources in this precedence order (highest wins):[[Configuring resources](https://docs.airbyte.com/platform/operator-guides/configuring-connector-resources)] 1. Connection‑specific 2. Connector‑specific (this source/destination instance) 3. Connector definition (all MySQL sources, all BigQuery destinations, etc.) 4. Instance‑wide (
JOB_MAIN_CONTAINER_*
/
global.workloads.resources.mainContainer.*
) Your
global.workloads.resources
(or the equivalent
JOB_MAIN_CONTAINER_*
) only control (4). If any of (1)–(3) are set, they override, which is exactly what your logs show:
Copy code
text [source] ... limits={memory=2Gi, cpu=2}, requests={memory=1Gi, cpu=1} [destination] ... limits={memory=2Gi, cpu=2}, requests={memory=1Gi, cpu=1}
To actually get 6 GiB for this replication pod, you have two options: --- ### 1. Set per‑connection resources to 6 GiB Use the UI to override just this connection’s resources (recommended when one job needs more than the global defaults):[[Configuring resources](https://docs.airbyte.com/platform/operator-guides/configuring-connector-resources)] - Open the connection in the Airbyte UI. - Go to the connection‑level resource configuration (the docs describe “connection‑specific” resource requirements). - Set, for both source and destination, for the Sync job: - `memory_request`:
6Gi
- `memory_limit`:
6Gi
(or more if you want headroom) -
cpu_request
/
cpu_limit
to your desired values (e.g.
2
). This will take precedence over any connector‑definition or instance‑wide settings and should show up in the logs like:
Copy code
text [source] ... resources: ... limits={memory=6Gi, cpu=2}, requests={memory=6Gi, cpu=2}
--- ### 2. Remove/adjust connector‑definition overrides so instance‑wide 6 GiB applies If you prefer all MySQL→BigQuery syncs to use your instance‑wide 6 GiB: 1. Ensure instance‑wide is set in
values.yaml
(for Helm v2 / abctl):[[Configuring resources](https://docs.airbyte.com/platform/operator-guides/configuring-connector-resources)]
Copy code
yaml    global:      workloads:        resources:          mainContainer:            cpu:              request: "2"              limit: "2"            memory:              request: "6Gi"              limit: "6Gi"
2. Clear or raise any connector‑definition resource requirements in the DB that are capping you at 1 Gi/2 Gi. The docs show how to set connector‑definition resources via SQL: find the definition ID, then update
resource_requirements
(for
jobType: "sync"
).[[Configuring resources](https://docs.airbyte.com/platform/operator-guides/configuring-connector-resources)] Example pattern (you must adapt this to your own DB and IDs):
Copy code
sql    -- Find the MySQL / BigQuery definitions    select id, docker_repository, resource_requirements    from actor_definition    where docker_repository like '%mysql%'       or docker_repository like '%bigquery%';     -- Then, for each, either NULL out resource_requirements (to fall back to instance-wide)    -- or set them to your desired 6Gi / 2 CPU:    update actor_definition    set resource_requirements = '{      "jobSpecific": [{        "jobType": "sync",        "resourceRequirements": {          "cpu_limit": "2",          "cpu_request": "2",          "memory_limit": "6Gi",          "memory_request": "6Gi"        }      }]    }'    where id = '<mysql-or-bigquery-definition-id>';
Be cautious: DB edits are powerful and not rollback‑guarded by Airbyte. --- ### How to verify After you change either the connection‑specific or connector‑definition resources: 1. Trigger a new sync. 2. Check the job logs again; you should now see 6 Gi in the
ResourceRequirements
lines.[[Debugging resources](https://docs.airbyte.com/platform/operator-guides/configuring-connector-resources#debugging)] If you’d like, share whether you prefer instance‑wide or only this specific connection to have 6 Gi, and I can sketch the exact SQL or UI steps tailored to that choice.
f
@kapa.ai when running a dump with airbyte 2.0.1 on source mysql 3.51.2 how it will get data from the source?
k
A message from kapa.ai
For a MySQL source using CDC (which
source-mysql
3.51.x supports), Airbyte 2.0.1 will read data in two distinct phases, depending on whether it’s the first run or a subsequent run: 1. Initial run (snapshot / “dump”) - Airbyte performs a snapshot of the current table contents using
SELECT
queries
. - This behaves like a Full Refresh: it reads all rows from the source tables at that moment in time. [[CDC 1.6](https://docs.airbyte.com/platform/1.6/understanding-airbyte/cdc); [CDC current](https://docs.airbyte.com/platform/understanding-airbyte/cdc)] - This snapshot part does not come from the binlog; it is standard SQL reads. 2. Subsequent runs (incremental via CDC) - After the snapshot, Airbyte reads changes from the MySQL binary logs (binlog) instead of re‑querying full tables. [[CDC 1.6](https://docs.airbyte.com/platform/1.6/understanding-airbyte/cdc); [MySQL troubleshooting](https://docs.airbyte.com/integrations/sources/mysql/mysql-troubleshooting#troubleshooting)] - It tracks its position in the binlog (file + position) as CDC offset state, and for each sync reads all changes (`INSERT`/`UPDATE`/`DELETE`) from the last stored position up to the start of the current sync. [[CDC current](https://docs.airbyte.com/platform/understanding-airbyte/cdc); [CDC 1.8](https://docs.airbyte.com/platform/1.8/understanding-airbyte/cdc)] - Airbyte emits these changes as records with CDC metadata columns such as
_ab_cdc_log_file
,
_ab_cdc_log_pos
,
_ab_cdc_updated_at
,
_ab_cdc_deleted_at
. [[CDC current](https://docs.airbyte.com/platform/understanding-airbyte/cdc)] If CDC is not enabled and you use an Incremental mode without CDC, Airbyte will instead periodically run
SELECT
queries filtered by a cursor field (for example
updated_at
) and will not see deletes or intermediate updates; it just sees the state as of each run. [[CDC vs non-CDC tutorial](https://airbyte.com/tutorials/incremental-change-data-capture-cdc-replication)] So, in summary: - Initial “dump”: table scan via
SELECT
(snapshot). - Ongoing incremental: log‑based reads from MySQL binlog using CDC, provided CDC is configured on the source.
f
@kapa.ai what do you mean with "- Initial “dump”: table scan via
SELECT
(snapshot)." is it a full table scan or is it done with chuncks?
k
A message from kapa.ai
For the initial “dump” (snapshot) of a CDC MySQL source, Airbyte performs a logical full snapshot of the table via
SELECT
, but the docs do not explicitly state that this snapshot is chunked for MySQL in the same way they describe chunking for Postgres. What is clearly documented: - The first CDC sync “takes a snapshot of the current state of the data… created with a
SELECT
statement and is effectively a Full Refresh.”[[CDC understanding](https://docs.airbyte.com/platform/understanding-airbyte/cdc); [CDC 1.8](https://docs.airbyte.com/platform/1.8/understanding-airbyte/cdc)] - After that, only changes are read from the logs (binlog for MySQL).[[CDC understanding](https://docs.airbyte.com/platform/understanding-airbyte/cdc)] - Airbyte in general uses chunking/checkpointing for large database tables to improve reliability and allow restarts from checkpoints, as called out for Postgres (“data are read in chunks… either successively or even concurrently” and checkpointing on CTID).[[Low latency stack](https://airbyte.com/tutorials/low-latency-data-availability-stack)] However, none of the provided MySQL‑specific or CDC docs explicitly describe how the initial MySQL snapshot is chunked (e.g., by primary key ranges, LIMIT/OFFSET, etc.), only that there are known issues around “partitioned read” logic in the MySQL connector for large tables.[[MySQL partition bug](https://github.com/airbytehq/airbyte/issues/64909); [MySQL concurrent sync](https://github.com/airbytehq/airbyte/issues/63776)] So, to answer precisely: - Conceptually, the initial “dump” is a full table snapshot via SQL
SELECT
. - Airbyte does have mechanisms for chunked/partitioned reads and checkpointing on large tables in general, but the knowledge sources you provided do not detail the exact chunking strategy for the MySQL initial snapshot, so I cannot state definitively how those chunks are implemented for your version of
source-mysql
3.51.2.
f
@kapa.ai I'0m having the following error on a replica
Copy code
2025-11-28 13:02:22 source WARN DefaultDispatcher-worker-1#global i.a.c.r.RootReader$FeedExceptionHandler(handleException):152 canceled feed 'global' due to thrown exception org.apache.kafka.connect.errors.ConnectException: An exception occurred in the change event producer. This connector will be stopped.
	at io.debezium.pipeline.ErrorHandler.setProducerThrowable(ErrorHandler.java:67) ~[debezium-core-3.1.2.Final.jar:3.1.2.Final]
	at io.debezium.connector.binlog.BinlogStreamingChangeEventSource$ReaderThreadLifecycleListener.onCommunicationFailure(BinlogStreamingChangeEventSource.java:1252) ~[debezium-connector-binlog-3.1.2.Final.jar:3.1.2.Final]
	at com.github.shyiko.mysql.binlog.BinaryLogClient.listenForEventPackets(BinaryLogClient.java:1110) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at com.github.shyiko.mysql.binlog.BinaryLogClient.connect(BinaryLogClient.java:657) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at com.github.shyiko.mysql.binlog.BinaryLogClient$7.run(BinaryLogClient.java:959) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at java.base/java.lang.Thread.run(Thread.java:1583) ~[?:?]
Caused by: io.debezium.DebeziumException: Failed to deserialize data of EventHeaderV4{timestamp=1764158138000, eventType=EXT_WRITE_ROWS, serverId=11502, headerLength=19, dataLength=783, nextPosition=101701229, flags=0}
	at io.debezium.connector.binlog.BinlogStreamingChangeEventSource.wrap(BinlogStreamingChangeEventSource.java:1206) ~[debezium-connector-binlog-3.1.2.Final.jar:3.1.2.Final]
	... 5 more
Caused by: com.github.shyiko.mysql.binlog.event.deserialization.EventDataDeserializationException: Failed to deserialize data of EventHeaderV4{timestamp=1764158138000, eventType=EXT_WRITE_ROWS, serverId=11502, headerLength=19, dataLength=783, nextPosition=101701229, flags=0}
	at com.github.shyiko.mysql.binlog.event.deserialization.EventDeserializer.deserializeEventData(EventDeserializer.java:343) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at com.github.shyiko.mysql.binlog.event.deserialization.EventDeserializer.nextEvent(EventDeserializer.java:246) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at io.debezium.connector.binlog.BinlogStreamingChangeEventSource$1.nextEvent(BinlogStreamingChangeEventSource.java:426) ~[debezium-connector-binlog-3.1.2.Final.jar:3.1.2.Final]
	at com.github.shyiko.mysql.binlog.BinaryLogClient.listenForEventPackets(BinaryLogClient.java:1082) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	... 3 more
Caused by: java.io.EOFException: Failed to read remaining 61 of 64 bytes from position -1564917825. Block length: 322. Initial block length: 779.
	at com.github.shyiko.mysql.binlog.io.ByteArrayInputStream.fill(ByteArrayInputStream.java:115) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at com.github.shyiko.mysql.binlog.io.ByteArrayInputStream.read(ByteArrayInputStream.java:105) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at io.debezium.connector.binlog.event.RowDeserializers.deserializeVarString(RowDeserializers.java:284) ~[debezium-connector-binlog-3.1.2.Final.jar:3.1.2.Final]
	at io.debezium.connector.binlog.event.RowDeserializers$WriteRowsDeserializer.deserializeVarString(RowDeserializers.java:212) ~[debezium-connector-binlog-3.1.2.Final.jar:3.1.2.Final]
	at com.github.shyiko.mysql.binlog.event.deserialization.AbstractRowsEventDataDeserializer.deserializeCell(AbstractRowsEventDataDeserializer.java:189) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at com.github.shyiko.mysql.binlog.event.deserialization.AbstractRowsEventDataDeserializer.deserializeRow(AbstractRowsEventDataDeserializer.java:143) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at com.github.shyiko.mysql.binlog.event.deserialization.WriteRowsEventDataDeserializer.deserializeRows(WriteRowsEventDataDeserializer.java:64) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at com.github.shyiko.mysql.binlog.event.deserialization.WriteRowsEventDataDeserializer.deserialize(WriteRowsEventDataDeserializer.java:56) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at com.github.shyiko.mysql.binlog.event.deserialization.WriteRowsEventDataDeserializer.deserialize(WriteRowsEventDataDeserializer.java:32) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at com.github.shyiko.mysql.binlog.event.deserialization.EventDeserializer.deserializeEventData(EventDeserializer.java:337) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at com.github.shyiko.mysql.binlog.event.deserialization.EventDeserializer.nextEvent(EventDeserializer.java:246) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	at io.debezium.connector.binlog.BinlogStreamingChangeEventSource$1.nextEvent(BinlogStreamingChangeEventSource.java:426) ~[debezium-connector-binlog-3.1.2.Final.jar:3.1.2.Final]
	at com.github.shyiko.mysql.binlog.BinaryLogClient.listenForEventPackets(BinaryLogClient.java:1082) ~[mysql-binlog-connector-java-0.40.2.jar:0.40.2]
	... 3 more

Stack Trace: org.apache.kafka.connect.errors.ConnectException: An exception occurred in the change event producer. This connector will be stopped.
	at io.debezium.pipeline.ErrorHandler.setProducerThrowable(ErrorHandler.java:67)
	at io.debezium.connector.binlog.BinlogStreamingChangeEventSource$ReaderThreadLifecycleListener.onCommunicationFailure(BinlogStreamingChangeEventSource.java:1252)
	at com.github.shyiko.mysql.binlog.BinaryLogClient.listenForEventPackets(BinaryLogClient.java:1110)
	at com.github.shyiko.mysql.binlog.BinaryLogClient.connect(BinaryLogClient.java:657)
	at com.github.shyiko.mysql.binlog.BinaryLogClient$7.run(BinaryLogClient.java:959)
	at java.base/java.lang.Thread.run(Thread.java:1583)
Caused by: io.debezium.DebeziumException: Failed to deserialize data of EventHeaderV4{timestamp=1764158138000, eventType=EXT_WRITE_ROWS, serverId=11502, headerLength=19, dataLength=783, nextPosition=101701229, flags=0}
	at io.debezium.connector.binlog.BinlogStreamingChangeEventSource.wrap(BinlogStreamingChangeEventSource.java:1206)
	... 5 more
Caused by: com.github.shyiko.mysql.binlog.event.deserialization.EventDataDeserializationException: Failed to deserialize data of EventHeaderV4{timestamp=1764158138000, eventType=EXT_WRITE_ROWS, serverId=11502, headerLength=19, dataLength=783, nextPosition=101701229, flags=0}
	at com.github.shyiko.mysql.binlog.event.deserialization.EventDeserializer.deserializeEventData(EventDeserializer.java:343)
	at com.github.shyiko.mysql.binlog.event.deserialization.EventDeserializer.nextEvent(EventDeserializer.java:246)
	at io.debezium.connector.binlog.BinlogStreamingChangeEventSource$1.nextEvent(BinlogStreamingChangeEventSource.java:426)
	at com.github.shyiko.mysql.binlog.BinaryLogClient.listenForEventPackets(BinaryLogClient.java:1082)
	... 3 more
Caused by: java.io.EOFException: Failed to read remaining 61 of 64 bytes from position -1564917825. Block length: 322. Initial block length: 779.
	at com.github.shyiko.mysql.binlog.io.ByteArrayInputStream.fill(ByteArrayInputStream.java:115)
	at com.github.shyiko.mysql.binlog.io.ByteArrayInputStream.read(ByteArrayInputStream.java:105)
	at io.debezium.connector.binlog.event.RowDeserializers.deserializeVarString(RowDeserializers.java:284)
	at io.debezium.connector.binlog.event.RowDeserializers$WriteRowsDeserializer.deserializeVarString(RowDeserializers.java:212)
	at com.github.shyiko.mysql.binlog.event.deserialization.AbstractRowsEventDataDeserializer.deserializeCell(AbstractRowsEventDataDeserializer.java:189)
	at com.github.shyiko.mysql.binlog.event.deserialization.AbstractRowsEventDataDeserializer.deserializeRow(AbstractRowsEventDataDeserializer.java:143)
	at com.github.shyiko.mysql.binlog.event.deserialization.WriteRowsEventDataDeserializer.deserializeRows(WriteRowsEventDataDeserializer.java:64)
	at com.github.shyiko.mysql.binlog.event.deserialization.WriteRowsEventDataDeserializer.deserialize(WriteRowsEventDataDeserializer.java:56)
	at com.github.shyiko.mysql.binlog.event.deserialization.WriteRowsEventDataDeserializer.deserialize(WriteRowsEventDataDeserializer.java:32)
	at com.github.shyiko.mysql.binlog.event.deserialization.EventDeserializer.deserializeEventData(EventDeserializer.java:337)
	... 6 more
k
A message from kapa.ai
This error pattern matches known MySQL CDC binlog deserialization issues seen with Airbyte’s Debezium-based MySQL source: - Debezium fails while deserializing a binlog rows event (
EXT_WRITE_ROWS
/
UPDATE_ROWS
), throwing
EventDataDeserializationException
caused by an
EOFException
in
ByteArrayInputStream.fill(...)
.[[EOF TABLE_MAP](https://discuss.airbyte.io/t/2732); [Issue 50856](https://github.com/airbytehq/airbyte/issues/50856); [Issue 51607](https://github.com/airbytehq/airbyte/issues/51607)] - The stack trace and message structure are effectively identical to: -
Failed to deserialize data of EventHeaderV4{..., eventType=EXT_UPDATE_ROWS/UPDATE_ROWS, ...}
- `Caused by: java.io.EOFException: Failed to read remaining X of Y bytes...`[[Issue 50856](https://github.com/airbytehq/airbyte/issues/50856); [Issue 51607](https://github.com/airbytehq/airbyte/issues/51607); [EOF TABLE_MAP](https://discuss.airbyte.io/t/2732)] In the referenced GitHub issues and forum thread, Airbyte engineers and users highlight: - The error is thrown inside the Debezium +
mysql-binlog-connector-java
stack, not in Airbyte’s own code.[[Issue 50856](https://github.com/airbytehq/airbyte/issues/50856); [EOF TABLE_MAP](https://discuss.airbyte.io/t/2732)] - It manifests as a deserialization error on a specific binlog event, often around row events (`WRITE_ROWS`/`UPDATE_ROWS`) or table map events, with EOF at a specific byte boundary.[[Issue 50856](https://github.com/airbytehq/airbyte/issues/50856); [EOF TABLE_MAP](https://discuss.airbyte.io/t/2732)] - In earlier reports, this was sometimes suspected to be due to binlog corruption or unexpected binlog contents, but at least one user with append-only vs append+dedupe behavior suspected a buffer management/connector issue rather than corruption.[[Issue 50856](https://github.com/airbytehq/airbyte/issues/50856)] However, the shared sources do not contain: - A confirmed root cause or definitive fix procedure for these EOF /
EventDataDeserializationException
errors in MySQL binlog CDC. - A step‑by‑step remediation specific to Airbyte 2.0.1 +
source-mysql
3.51.x. Given only the available information, here is what can be said reliably: 1. What the error means - Debezium, using
mysql-binlog-connector-java
, tried to parse a binlog
EXT_WRITE_ROWS
event with
dataLength=783
bytes and could not read the expected number of bytes from its internal buffer; it hit EOF partway through (
Failed to read remaining 61 of 64 bytes...
).[[Issue 50856](https://github.com/airbytehq/airbyte/issues/50856); [EOF TABLE_MAP](https://discuss.airbyte.io/t/2732)] - This is treated as a fatal event deserialization failure, so Debezium raises
DebeziumException
, which Airbyte surfaces as a job failure and stops the connector.[[Issue 50856](https://github.com/airbytehq/airbyte/issues/50856); [Issue 51607](https://github.com/airbytehq/airbyte/issues/51607)] 2. How similar issues are characterized in Airbyte’s public threads - Forum and GitHub reports describe these as sporadic EOF/deserialization errors against otherwise healthy MySQL instances, sometimes during low traffic and with valid binlog retention.[[Issue 50856](https://github.com/airbytehq/airbyte/issues/50856); [EOF TABLE_MAP](https://discuss.airbyte.io/t/2732)] - In at least one issue, the reporter argues this looks like a buffer management issue in the binlog connector / Debezium path rather than actual binlog corruption, because: - The error occurs at precise byte boundaries. - The same pipeline with a different sync mode (append+dedupe) does not show the problem. - Binlog retention rules out logs being purged while reading.[[Issue 50856](https://github.com/airbytehq/airbyte/issues/50856)] 3. **What is not documented** - There is no explicit, documented workaround (e.g., “set Debezium property X” or “restart from offset Y”) in the provided sources. - There is no Airbyte doc that describes how to “skip” or “ignore” a single problematic binlog event. Because of that, I cannot confidently prescribe a fix based only on these sources. --- Given the limits of the available documentation: - The error you see is consistent with the known MySQL CDC binlog deserialization / EOFException problems in Debezium used by Airbyte.[[Issue 50856](https://github.com/airbytehq/airbyte/issues/50856); [Issue 51607](https://github.com/airbytehq/airbyte/issues/51607); [EOF TABLE_MAP](https://discuss.airbyte.io/t/2732)] - The knowledge sources do not provide a definitive resolution path, only examples of similar stack traces and some speculation that it may be a connector‑side bug rather than source‑side binlog corruption.[[Issue 50856](https://github.com/airbytehq/airbyte/issues/50856)] To move forward, you would likely need to: - Engage Airbyte support / GitHub with this exact trace and environment so they can correlate with current Debezium and
mysql-binlog-connector-java
behavior. - Optionally validate on the MySQL side that the referenced binlog file and position are readable by MySQL tools, to help distinguish true binlog corruption from connector deserialization issues (this step is suggested by the nature of the error but is not documented in the provided sources, so I cannot give detailed commands here). If you have more Airbyte‑specific logs around this job (e.g., state, offsets, or whether other connections to the same MySQL work), sharing them with Airbyte in an issue similar to the linked ones would be the next supported step.
f
@kapa.ai how can I restart airbyte?
k
A message from kapa.ai
How you restart Airbyte depends on how it was deployed. From your context, you’re using Airbyte 2.0.1 installed via
abctl
(local kind cluster). ### 1. Soft restart of components (abctl local) Use
abctl
to restart the local Kubernetes deployments:
Copy code
bash # See deployments abctl local deployments  # Restart all Airbyte deployments abctl local deployments --restart
This restarts the Kubernetes workloads without reinstalling Airbyte.[[abctl ref](https://docs.airbyte.com/platform/deploying-airbyte/abctl#install-and-manage-local-airbyte-instances); [abctl ref](https://docs.airbyte.com/platform/deploying-airbyte/abctl#reference)] ### 2. Full stop and reinstall (local instance) If you want a “hard” restart:
Copy code
bash # Stop Airbyte but keep data abctl local uninstall  # Start it again (reinstall / upgrade to current chart version) abctl local install
abctl local install
installs or updates the local instance; it can take up to ~30 minutes depending on network speed.[[abctl manage](https://docs.airbyte.com/platform/deploying-airbyte/abctl#install-and-manage-local-airbyte-instances)] ### 3. Restart specific pods via kubectl (advanced) Because
abctl
runs Airbyte in a
kind
cluster, you can also use
kubectl
directly, pointing at the
abctl
kubeconfig:
Copy code
bash kubectl --kubeconfig ~/.airbyte/abctl/abctl.kubeconfig \   --namespace airbyte-abctl get pods  # Example: restart worker and workload API server deployments kubectl --kubeconfig ~/.airbyte/abctl/abctl.kubeconfig \   -n airbyte-abctl rollout restart deployment airbyte-abctl-worker  kubectl --kubeconfig ~/.airbyte/abctl/abctl.kubeconfig \   -n airbyte-abctl rollout restart deployment airbyte-abctl-workload-api-server
Using
kubectl
is explicitly supported for interacting with an
abctl
-installed instance.[[abctl troubleshoot](https://docs.airbyte.com/platform/deploying-airbyte/troubleshoot-deploy#faq)]
f
@kapa.ai which is the default connection timeout for mysql source on airbyte?
k
A message from kapa.ai
The provided knowledge sources do not state a specific default connection timeout value for the MySQL source connector (e.g., in seconds or milliseconds). What we do have is: - For Postgres and some JDBC‑based destinations (Postgres, Vertica), the docs explicitly say the connector supports a
connectTimeout
JDBC parameter and that it defaults to 60 seconds, with
connectTimeout=0
meaning “longest time available”.[[Postgres dest](https://docs.airbyte.com/integrations/destinations/postgres#naming-conventions); [Postgres source JDBC](https://docs.airbyte.com/integrations/sources/postgres/postgres-troubleshooting#advanced-custom-jdbc-connection-strings); [Vertica dest](https://docs.airbyte.com/integrations/destinations/vertica#naming-conventions)] - For MySQL, the troubleshooting docs and forum threads talk about: - HikariCP pool timeouts like
Error: HikariPool-1 - Connection is not available, request timed out after 30001ms/60001ms
when the pool can’t obtain a DB connection in time, often due to network/VPC or DB side issues.[[MySQL troubleshooting](https://docs.airbyte.com/integrations/sources/mysql/mysql-troubleshooting#troubleshooting); [MySQL connection failed](https://discuss.airbyte.io/t/1994); [Bluehost timeout](https://discuss.airbyte.io/t/2243); [MSSQL timeout](https://discuss.airbyte.io/t/1839)] - MySQL server‑side timeouts like
wait_timeout
,
slave_net_timeout/replica_net_timeout
, etc., which can abort long‑running CDC or snapshot operations.[[MySQL multiple sources](https://discuss.airbyte.io/t/1511); [MySQL CDC EOF/timeout](https://docs.airbyte.com/integrations/sources/mysql/mysql-troubleshooting#eventdatadeserializationexception-errors-during-initial-snapshot)] However, none of the MySQL‑specific docs or threads provided state: - “The default connection timeout for the MySQL source is X seconds/ms.” - Or a MySQL‑equivalent
connectTimeout
default like Postgres has. Because of that, I cannot give a precise default value for the MySQL source’s connection timeout from these sources alone. So, based strictly on the available documentation: > The knowledge sources do not explicitly mention the default connection timeout value for the MySQL source connector, so I cannot state it confidently.
f
@kapa.ai how can I change debezium params for the following ones?
Copy code
connect.max.batch.size
max.batch.size
max.queue.size
k
A message from kapa.ai
The available docs and threads you provided do not document any supported way to override Debezium connector properties such as: -
connect.max.batch.size
-
max.batch.size
-
max.queue.size
for the MySQL source in Airbyte. What is documented: - Airbyte exposes a CDC “Queue Size” parameter at the source level, which controls “how many CDC records can be queued in memory before processing” and has a recommended default of 10,000.[[CDC best practices](https://docs.airbyte.com/platform/understanding-airbyte/cdc-best-practices#source-configuration); [CDC best practices 1.8](https://docs.airbyte.com/platform/1.8/understanding-airbyte/cdc-best-practices#source-configuration); [CDC best practices next](https://docs.airbyte.com/platform/next/understanding-airbyte/cdc-best-practices#source-configuration)] This is an Airbyte‑level setting; the docs do not state exactly which Debezium property it maps to internally. - In a support thread about ingesting a large MySQL table, an engineer links to the Debezium publisher code showing internal Debezium variables but does not give a supported procedure for changing them; they mention they plan to test changing Debezium parameters themselves.[[MySQL big table](https://discuss.airbyte.io/t/1200)] There is no mention in these sources of: - A configuration field in the MySQL source UI/JSON that directly sets
connect.max.batch.size
,
max.batch.size
or
max.queue.size
. - A Helm/`abctl` or env‑var interface that passes those exact Debezium properties through. Because of that, based on the provided knowledge: - You can tune the CDC Queue Size through the Airbyte source configuration (and should generally leave it at the default 10,000 unless directed by support).[[CDC best practices](https://docs.airbyte.com/platform/understanding-airbyte/cdc-best-practices#source-configuration)] - There is no documented, supported mechanism in these docs to directly set Debezium’s
connect.max.batch.size
,
max.batch.size
, or
max.queue.size
for the MySQL connector. If you specifically need to alter those Debezium internals, the recommended path—per the linked thread where Airbyte engineers themselves are “testing changing values in Debezium parameters”[[MySQL big table](https://discuss.airbyte.io/t/1200)]—would be to open a support ticket or GitHub issue so they can advise on whether such overrides are currently possible in your Airbyte version.